How to Install Windows NT 3.51
Windows NT 3.51 is a closed source operating system from Microsoft that was based on the same architecture as Windows 3.1, but not on the MS-DOS platform. It was released on 30th May 1995 and support was stopped for it as of 31st December...
Part 1 of 3:
Before Installation
- Insert the floppy disk into the computer.
- Start the computer.
Part 2 of 3:
Installation
-
Picture 1 of How to Install Windows NT 3.51 Insert the 2nd floppy disk and press Enter. -
Picture 2 of How to Install Windows NT 3.51 Press ↵ Enter. -
Picture 3 of How to Install Windows NT 3.51 Choose which setup method you would like to use.- All down to personal preference but the 'Express Setup' was used for this tutorial.
-
Picture 4 of How to Install Windows NT 3.51 Insert the 3rd floppy disk and press Enter. -
Picture 5 of How to Install Windows NT 3.51 If you have any hardware that requires a separate installation, insert the disk for that hardware and press S else press ↵ Enter.- You will be able to install the hardware at a later date if you cannot find the installation disk for that hardware there and then.
-
Picture 6 of How to Install Windows NT 3.51 Choose whether to install from a CD-ROM or floppy disk.- This is all down to personal preference but the CD was chosen in this tutorial.
-
Picture 7 of How to Install Windows NT 3.51 Press C to continue. -
Picture 8 of How to Install Windows NT 3.51 Choose which partitioning to install Windows on by using the arrow keys then pressing ↵ Enter.- For this tutorial, we only have the unpartitioned space so we'll select that.
-
Picture 9 of How to Install Windows NT 3.51 Select which file system you would like to format the hard drive as using the arrow keys and press ↵ Enter..- All down to personal preference but NTFS was chosen in the tutorial. Formatting it as FAT will make it easier to transfer files to and from Windows 9x systems.
-
Picture 10 of How to Install Windows NT 3.51 Select where to install Windows and press ↵ Enter.- Normally, it is recommended to install Windows in the location Windows recommends.
-
Picture 11 of How to Install Windows NT 3.51 Remove any floppy disks inserted into the computer and press ↵ Enter to restart the computer.- If you have the setup CD inserted into the computer, leave it in.
-
Picture 12 of How to Install Windows NT 3.51 Make sure "Windows NT Workstation Version 3.51 is highlighted and press ↵ Enter.- It may choose the operating system without your consent at this point (options appear on screen for less than a second in some cases). This is nothing to worry about.
-
Picture 13 of How to Install Windows NT 3.51 Type in your Name and (optional) a Company name and either click Continue or press ↵ Enter. -
Picture 14 of How to Install Windows NT 3.51 Confirm that the details you typed in are correct and then click Continue. -
Picture 15 of How to Install Windows NT 3.51 Type in a 'Computer Name' and click Continue.- Type any name as long as it is different to your Name and Company.
-
Picture 16 of How to Install Windows NT 3.51 Confirm that the Computer Name you typed in is correct and click Continue. -
Picture 17 of How to Install Windows NT 3.51 Choose your language from the drop box and click Continue. -
Picture 18 of How to Install Windows NT 3.51 Set up your printer if required. If there is a printer attached to your computer, this page is dedicated to getting it set up.- In this tutorial, no printer was connected so Cancel was pressed.
- You can setup a printer at any time.
-
Picture 19 of How to Install Windows NT 3.51 Click OK to continue. -
Picture 20 of How to Install Windows NT 3.51 If you want to have a network connection, insert a network adapter into the computer and click Detect.- In this tutorial, no network cards were inserted into the computer so Continue was clicked.
-
Picture 21 of How to Install Windows NT 3.51 To install a remote network, click Remote.- For this tutorial, Continue was selected.
-
Picture 22 of How to Install Windows NT 3.51 If you have a network adapter card installed on the computer, select the appropriate card from the drop down menu and click Continue.- There was no network adapter installed in this tutorial so No Network was clicked.
-
Picture 23 of How to Install Windows NT 3.51 Click OK to not install a network otherwise click Cancel. -
Picture 24 of How to Install Windows NT 3.51 Type in your password and confirm your password and then click Continue. -
Picture 25 of How to Install Windows NT 3.51 Choose to create a 'local account' if desired. To do so, fill in the fields below and click Continue.- A local account was not setup in this tutorial so Cancel was clicked.
- You can make a local account at a later date.
-
Picture 26 of How to Install Windows NT 3.51 Click OK if you don't want to set up a 'local account otherwise click Cancel. -
Picture 27 of How to Install Windows NT 3.51 If confronted with this message about "EDIT.COM", make sure to highlight "MS-DOS Editor" and click Continue. -
Picture 28 of How to Install Windows NT 3.51 Ensure the Date and Time are set correctly and click OK. -
Picture 29 of How to Install Windows NT 3.51 Click OK to continue. -
Picture 30 of How to Install Windows NT 3.51 Ensure all your display settings are correctly set and click OK. -
Picture 31 of How to Install Windows NT 3.51 Create an Emergency Repair disk if desired. If your computer becomes inoperable due to software problems, the Emergency Repair disk can be inserted into your computer and attempt to fix problems.- No Emergency Repair disk was created in this tutorial so No was clicked.
- There is no guarantee that the Emergency Repair disk will solve all problems.
-
Picture 32 of How to Install Windows NT 3.51 Remove all floppy disks from the computer and click Restart Computer.- If you have a installation CD inserted into the computer, leave this in.
-
Picture 33 of How to Install Windows NT 3.51 Ensure "Windows NT Workstation Version 3.51" is highlighted and press Enter. -
Picture 34 of How to Install Windows NT 3.51 Ensure "Windows NT Workstation Version 3.51" is highlighted and press Enter. -
Picture 35 of How to Install Windows NT 3.51 Press the Ctrl + Alt + Del keys. -
Picture 36 of How to Install Windows NT 3.51 Type in your 'Username' and 'Password' and click OK.- If you didn't create a local account, use the username "ADMINISTRATOR" and type in your password.
-
Picture 37 of How to Install Windows NT 3.51 Setup is now complete. Enjoy all the Windows NT 3.51 has to offer.
Part 3 of 3:
Shutting Down
-
Picture 38 of How to Install Windows NT 3.51 Click File. -
Picture 39 of How to Install Windows NT 3.51 Click Shutdown... -
Picture 40 of How to Install Windows NT 3.51 Ensure the "Shutdown" box has been selected and click OK. -
Picture 41 of How to Install Windows NT 3.51 Turn off your computer from either the power button or from the plug.
Update 04 March 2020
You should read it
- How to press the Sino audio wall wire
- How to Boot a Computer from a CD
- How to Boot into Safe Mode on Mac OS X or Windows
- Pressing F5 or Refresh continuously does not make your computer run faster, people are misunderstanding Windows
- How to click the 4-wire network cable, press the network cable with the phone cord
- How to Change the Volume on a Mac
- How to Check Python Version on PC or Mac
- Change the setting mode when you press the Power button on the computer
- How to fix the loss of the New menu in the right-click menu
- CONTINUE command in SQL Server
- Pocket the address to buy the best French Press French coffee maker
- How to Fix Windows 8.1 Crashes
Maybe you are interested
This hidden score shows how well a computer runs Windows Windows 11 22H2: Update Moment 1 with many notable features This is the easiest way to reinstall Windows 11 and fix the problem! 5 ways to turn off Windows 11 Update, stop updating Windows 11 Speed up Internet connection on Windows 11 computer How to check if your Windows computer supports Miracast