Many of you use USB sometimes encounter a very annoying error that is unable to Format the USB, this is an error mentioned quite a lot at the present time. If you are getting this error then don't worry. The following article of TipsMake.com will help you answer some causes and how to fix non-USB format errors thoroughly, please refer.
1. The causes for the USB format cannot be connected
- USB infected with Virus
USBs are very portable and they can be connected to a computer easily to backup or transfer data. Because they are commonly used by users and can be used on many different computers, USB drives are more likely to be damaged or infected by viruses. Every time you plug a USB drive into a computer's USB port that is not protected by antivirus software, the USB drive will infect a virus that usually works by filling the USB drive with dangerous files and making the USB drive stop working and cannot Format. So try to use antivirus software and Scan USB to see if the virus is infected.
- USB hardware is broken
After a long time of using, the USB corrupted hardware is hard to avoid, especially for USB devices are very portable we often take away so inevitably impact. In addition, the fact that we unplug the plug often can cause the USB to break the pin, which can cause the USB to fail during our use and cannot be formatted. This error is easily identifiable and you can take the device to a service center for inspection and repair.
- USB is protected against data recording
Some USBs have a feature that blocks the writing of content to USB, which may also be the reason why USB cannot be formatted. If your USB device is enabled, consider and turn it off then proceed to Format.
2. How to fix the error Format USB is not
- Method 1: Format with CMD command
Step 1: Open a command prompt window under Admin by opening the search window and enter cmd. When the results show up, right-click on Command Prompt and select Run as administrator
Step 2: In the CMD window, enter the diskpart command and then press Enter.
Next you enter the list disk command and then press Enter.
Now the list of memory drives in your computer will appear, or find your USB drive, for example in the picture below the USB drive called Disk 2.
Next:
- Enter the command select disk 2 to select the USB drive
- Type: create partition primary and press Enter ;
- Type: format fs = fat32 or format fs = ntfs quick and press Enter to format the USB in FAT32 or NTFS format;
- Enter: exit to exit
- Method 2: Use 3rd party software to Format USB
If using the features available in Windows does not help you format the USB, or use other supporting software to Format USB.
A pretty useful software that helps us to Format USB is the Minitool Partion Wizard , you can download the software here:
https://www.minitool.com/partition-manager/
After installing the software, right-click on the USB partition and select Format, there will be a table showing you to choose Format. Select and remember to click Apply to start the USB Format software.
Above TipsMake.com introduced to you a number of ways to fix the error of not formatting the USB, hopefully the article will help you. Good luck!