One of the most common mistakes on Windows operating systems when using third-party applications is "Has Stopped Working". In this article, the Software Tips will guide you how to fix Has Stopped Working error on Windows.
Method 1: Run the application in an old version of Windows
Step 1: Right-click the Has Stopped Working error app and select Properties .
Step 2: Next, select the Compatibility tab and check the Run this program in compatibility mode for line:
Then you can choose Windows XP (Service Pack 2/3), Windows Vista.
Finally, click OK to finish.
Method 2: Fix errors in the Registry
Step 1: You press Windows + R to open the RUN window. Then, you enter Regedit and press Enter to open the Registry.
Step 2: Then, you open the folder in the following order:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsWindows Error ReportingNext, double click on DontShowUI to edit.
Step 3: Finally, you set the Value data value from 0 to 1 and click OK to complete.
Method 3: Use Ccleaner to scan the Registry
Link Download: https://www.ccleaner.com/
Step 1: You proceed to download the software and install to use.
Step 2: You start the software, select the Registry tab and tick all the items inside. Then, you click Scan for Issues to conduct a scan.
Step 3: After the scan is complete, you select Fix selected Issues to fix the error.
Step 4: After fixing the error, you will receive the Issues Fixed notification that means it has succeeded. At this time you will not see errors anymore.
Method 4: Check the status of the hard drive
Usually the "Has Stopped Working" error occurs when it needs to use a file and the software can't find it on the hard drive. The failure to find files on the hard drive is often due to the old hard drive, slow read speed and many fragments affecting performance.
Step 1: You Right-click on the C: drive (because Windows is installed on drive C :). Then you select Properties .
Step 2: In the Properties window , select Tools and select Check in Error Checking .
Step 3: The Error checking window will appear and ask if you want to check or not. You select Scan Drive to check.
Step 4: After the scan is complete, you will receive a notification. If you get the message No errors were found as shown below, that means Has Stopped Working is not the hard drive. If you get any other errors, please check your drive, hard drive to be fixed.
Method 5: Turn off the background run
When we use Windows operating system, there are many applications, different data files running in the background to be able to operate immediately when needed. The Has Stopped Working error is also most likely coming from the fact that the files are running in the background and are not freeing up space for other files, causing the error.
Step 1: Open the Start Menu and select RUN to enter the command.
Step 2: Enter the command " msconfig " and click OK to boot.
Step 3: When the System Configuration window is opened, go to the Services tab . First, select Hide all Microsoft Services to open all background runers. Next you select Disable all to turn them off, after turning off you click Apply -> OK to finish.
Method 6: Check the overall computer system
If the software does not find the files that are needed to function, it also reports Has Stopped Working error. The fact that the file could not be found comes from many different causes, we need to check it clearly.
Step 1: Open the Start Menu and enter Command Prompt . Then select Run as administrator.
Step 2: Then, you enter the command " sfc / scannow " and press Enter to start scanning.
Step 3: The scan time will last from 10 to 15 minutes.
Then you will receive a notification, this part of the notice is that we will see the results and contrast with the sample Microsoft message:
- Windows Resource Protection did not find any integrity violations: Do not have any corrupted system files.
- Windows Resource Protection could not perform the requested operation: Unable to scan, you need to switch to Safe Mode to scan.
- Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.Log% WinDir% LogsCBSCBS.log: The system found the files to be corrupted and fixed them.
- Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log% WinDir% LogsCBSCBS.log: The system found the file is corrupt and there are some files that cannot be fixed.
In the above messages, Windows Resource Protection found corrupt files but was unable to fix some of them is the most rare error and when you encounter, you should take to the computer store to have them check and reinstall the files. failed. If you want to fix it yourself, refer to Method 5 in this article.
Method 7: Monitor computer system status
Computer systems are made up of many small components, so they need to be compatible for stable operation. Has Stopped Working error occurs when your computer hardware is not enough to meet the needs of the software. One of the hardware that often gets "fully loaded" when using heavy applications is the CPU and RAM. So, please see if your computer system can meet the configuration requirements of the software or not? If not, please upgrade or use the lower version of the software for lightweight.
Method 8: Use EasUS Partition Master to recover lost files
This is a lightweight tool that is useful in saving lost files on Windows systems.
Step 1: You proceed to the homepage to download the application.
Homepage: https://www.easeus.com/datarecoverywizardpro/
Step 2: You start the software and Right-click the drive to check the file system. Then you select Check file system .
Step 3: Check the box labeled Try to fix errors if found so that the software will automatically fix the error when the file is corrupted or lost. Then click Start to start the scan.
Step 4: The system will scan about 10 to 15 minutes and give you the results. So you can safely use your computer without having Has Stopped Working error anymore.
In this article, the Software Tips guide you how to handle Has Stopped Working error on Windows operating system. Good luck!