Tips for checking your computer configuration are easy and complete

When you want to buy a new computer, a laptop to study, or to upgrade the configuration to run faster, or want to check the current computer configuration can meet the requirements of running certain software, games Or not . these are the situations that you come across every day. To check the configuration parameters of a PC, or Laptop, Notebook, . is very simple, just remember a few steps, so those who are feeling 'blind' about this can themselves Information after reading this tutorial.

If you are using Windows operating system, there are two ways for you to check the machine configuration:

1. Test right on Windows without software : You will be able to check most of the basic parameters. However, details of each hardware of the computer you can not fully understand. Use this method when you need a preliminary check, without going into too much depth.
2. Use tools to help check the machine configuration: You will use some fairly light tool to read the details of the machine configuration. This method is useful when you know a little about the parameters of the computer such as CPU type, clock speed, RAM plug some bar, what type, RAM bus, hard drive parameters, .

How to check the computer configuration without software

---

Usually to preliminary assess whether the computer configuration is strong or weak, meets the minimum configuration requirements or recommendations of certain software, games, or see installing 64bit or 32bit Windows, . I just use the way to check. The configuration requires no other software.

Right on the Windows operating system you have 2 places that give you your computer configuration parameters.

1. View the computer configuration via My Computer / Computer / This PC

The operation is very simple, on the Desktop you see the My Computer computer icon for Windows 7 or below, Computer for Win 8 or This PC for Win 10 . Right-click and then select Properties.

Basic computer configuration table including parameters of CPU, RAM, operating system, Windows already activated . will appear as the following image:

1. Rating: Windows rating by checking your computer's configuration
2. Processor: The chip code and the clock of the processor attached to your computer
3. Installer Memory (RAM): The amount of RAM
4. System Type: Your operating system uses 64bit or 32bit
5. Pen And Touch: Does your computer support the use of a pen or touch?

2. Check to use the 'dxdiag' command in the RUN window

This gives you more computer configuration information than Method 1.

To do so, first you need to open the RUN dialog box by: Windows + R keyboard shortcut, or type in the Search box at the ' Run ' Start 7 button.

RUN window appears, type ' dxdiag ' and then Enter: (If a dialog box opens when you first open - Select Yes to continue)

The DirectX Diagnostic Tool window will open and provide you with information about your computer's hardware and operating system.

At the System tab, you will first be able to read the configuration of the CPU type - clock speed, RAM capacity, operating system, firm, hostname, .

Switch to the Display tab, you will see the screen configuration of the device. This is a very noticeable parameter, because the graphics card is needed when running high graphics applications, heavy games. You can check whether the device is using a discrete graphics card or an onboard card.

Tab Sound you will see the sound card information of the machine.

Input tab is information about devices such as Mouse, Keyboard.

OK, got it Here you have seen the most important configuration parameters , the most basic parameters of the computer. These parameters are enough for you to evaluate the configuration, check the machine configuration, consider upgrading the configuration, .

However, if you are knowledgeable or want to learn more about the hardware configuration parameters of each computer, check the performance of each device, read on to the next section.

Use the msinfo32 command to check computer information

Press Windows key + R to open the Run window, type ' msinfo32 ' and then press Enter to view all computer information.

Not only configuration information, but also information about hardware, software and other components on the machine.

The System Information window opens, allowing you to see a lot of system parameters including: Operating system name with 32bit or 64bit Windows version, system name, computer manufacturer, processor, scroll down a little is the parameters of RAM, . If you want to know details about hardware, software or other components can navigate in the menu on the left.

How to check the configuration of the computer using the software

---

Saying using software seems complicated, but the software tools that help check the computer configuration are very compact. In this article I introduce only the 2 best support tools and are widely used by users: CPU Z and EVEREST Ultimate Edition.

Software for checking the configuration of CPU-Z computer

The advantage of CPUZ is extremely compact, but provides very detailed configuration information. To download the software and how to use it, read the following article: Download CPU-Z software to check the computer configuration

The basic interface of the software as shown below, you switch the Tab to see the configuration parameters.

1. CPU tab: Contains information about Intel Core CPU name , clocked at 2.00GHz . Next, on the bottom right corner has the Cores 4 Threads 8 parameter indicating the CPU has 4 cores and 8 threads.
   

2. Caches Tab: Provides information about the clock, cache of the processor on your computer
   

3. Mainboard tab: information about the motherboard on the computer such as brand name (Manufacturer), model (Model), BIOS version (Version), etc.
   

4. Memory tab : The information of RAM in the Memory tab includes RAM capacity , type of RAM and RAM speed as shown below:
   

5. SPD tab: The amount of memory on your device and the processing speed
   

6. Graphics tab: Information about computer display card
   

7. Bench Tab: Measure, check your computer configuration to see how much power is reached. If you only need to see the computer configuration, you should not use this feature because it can harm the computer.
   

8. Tab About: Information about the CPU-Z version we are using, the author, the homepage of the CPU-Z software, the Windows operating system being used, DirectX.

EVEREST Ultimate Edition

This is a tool with both paid and free versions. For basic needs, the Free version provides all the parameters you need to know, and more. With Everest the parameters are so detailed that you can see what Main supports, the device's standard port, System Summary, Chipset, Windows Information, UpTime Statistics, CPU Benchmarks, Windows Sidebar Gadget, Sensor Information.

Conclude

---

You may come across other tools that also help check your computer's configuration, but for the easiest of users. Articles like pocket tips, very compact but fully guaranteed what you need. Any comments do not hesitate to share by Comment, Like, Share posts. Thank you.