Does your Windows 10 PC contain a lot of important data and you have to freeze your hard drive to protect the data? In the following article, TipsMake.com shares with readers the tips for freezing hard drives on Windows 10 effectively and safely.
1. Freeze Windows 10 hard drive with DeepFreeze
Step 1: You visit the website https://www.faronics.com/en-uk/downloads_en-uk to download Deep Freeze.
Next, select the D eep Freeze Standard (1) => Continue to Downloads (2) .
If you have a request form, please fill in the optional information, but in the Email section, you must fill it in correctly so that the developer can send the software via Email to you.
Step 2: Click on the downloaded file DFStd as shown below to proceed with the installation.
Step 3: Then click Next to continue.
Step 4: Check the box I ACCEPT . (1) => Next (2) .
Step 5: Tick the box Use Evaluation (1) to select the trial version and click Next (2) .
Step 6: Click the drive to be frozen by switching the switch from Thawn to Frozen (1) . By default, the Windows installation drive will be frozen and you cannot unfreeze this drive. After setup is complete, click Next (2) .
Next, click Install to complete the installation.
ThawnSpace is a virtual partition that does not freeze so you can store data on your computer without losing it when restarting your computer, but this virtual partition will take up some of your hard drive space if you enable this feature.
Step 7: After starting the computer, the Deep Freeze icon will appear on your computer in the system tray. To access the software, hold Shift + left click on the software icon.
Step 8: Click OK because the first installation does not have a password.
Step 9: In the Boot Control section , you can set parameters such as freezing (Boot Frozen), de-freezing at the restart of the second computer . (Boot Thawned on Next) and freezing (Thawned) in the Status on section Next Boot (1) . To save the settings, select Apply and Reboot (2) .
Step 10: You need to set a password to ensure the safety of the software by going to the Password tab (1) to set a new password (2) and re-entering the new password again (3) . Then click OK (4) to save the password.
2. Freeze the hard drive with Shadow Defender
Step 1: Visit the following website and click Download to download Shadow Defender https://www.shadowdefender.com/download.html
Step 2: Open the downloaded installation file and click Next to continue.
Step 2: You tick I Accept . (1) => Next (2) .
Step 3: You name the user (1) and click Next (2) .
Step 4: Click Next to move to the next step.
You continue to click Next .
And finally you click Install to install.
Step 5: Click Finish to reboot the computer is finished.
Step 6: After restarting your computer, find and double-click the Shadow Defender icon in the system tray.
Step 7: In the main interface of Mode Settings , select the drive to freeze by ticking that drive (1) => Enter Shadow Mode (2) .
Step 8: Select the item Enter Shadow mode on Boot (1) => OK (2) is done.
Step 9: To de-freeze, tick the drive to be frozen (1) => Exit Shadow Mode (2) .
Step 10: Select the item Exit Shadow Mode and reboot now (1) => OK (2) to remove the freezing and restarting the computer.
With the instructions of freezing in the article, you can ensure that the data on your computer is not infringed by others and also a way to protect your computer from the risk of virus infection quite effectively. Good luck!