HDD is very prone to Bad Sector errors after a long time of use as well as accessing a lot of space on the disk. Checking whether the hard drive is in Bad Sector or not will help you to have a suitable plan to Backup the data before it cannot be saved. In this article, the Software Tips will guide you how to check the hard drive for Bad Sector or not.
1. Check by HDD Scan
Link Download: https://hddscan.com/
Step 1: Select the hard drive you want to test with the top dialog box.
Step 2: Then click the Test button we will have 3 different Test modes VERIFY , READ and BUTTERFLY . Normally, we will use Verify .
Step 3: After selecting VERIFY a new window appears, press the right arrow button to continue.
Step 4: A working task will appear in the white box below, click on that task and select Show Details .
Step 5: The software will scan the hard drive of your choice. Then you need to follow the results table to get the most accurate information.
Each box appears will represent a data area on the hard drive, the color of the square will indicate the health of that data area. You can see the color annotation on the right, if there are bad sectors in the data area , the squares will be blue.
2. Use Crystal Diskmark
Link Download: https://crystalmark.info/en/software/crystaldiskmark/
With Crystal Diskmark software, you can track the overall quality of the hard drive most. With Crystal Diskmark we only need to observe the color to know the disease. They will have the following colors:
- Good - blue: The disc is still good and not bad sectors.
- Caution - yellow: The disc has a slight error, is bad in some sectors and can be intervened by software.
- Bad - red: The hard drive is badly bad by Bad Sector, the software could not intervene and repair the error successfully. You must cut off the bad sectors.
- Gray - gray: No specific errors have been identified.
3. Use Windows testing software
On Windows, there are tools to help you monitor the status of your hard drive and provide effective solutions.
Step 1: You open This PC and Right-click the drive to check for Bad Sector. Then you select Properties .
Step 2: Next, you go to the Tools tab and select Check .
Step 3: Continue, select Scan Drive for Windows to scan the drive and check the status.
Scanning time will take 3-5 minutes depending on the speed of your hard drive.
Step 5: After the scan is complete, you will receive a notification, we will rely on the results to read the error:
- If the message shows Windows successfully scanned the drive. No error were found (as pictured) means that the drive is in good condition and not yet in Bad Sector.
- If the message shows other results, the drive has been Bad Sector and you need the appropriate solution to solve. Windows will guide you through some solutions. Please select Show Details to follow the instructions /
In this article, the Software Tips guide you how to check whether your hard drive has Bad Sector or not, the fastest and most effective. Good luck!