How to Get Around in 3D Coat

If you're new to 3D Coat, you might not know how to get around in it. It is extremely helpful to have this information. Rotate the form.

Method 1 of 2:

Picture 1 of How to Get Around in 3D Coat
Rotate the form.
1. Select an area out of the form and press and hold the left mouse button. This will enable you to move the form around.
2. While still holding down the left mouse button, move it around. The form will move around.
Picture 2 of How to Get Around in 3D Coat
Zoom in and out.
1. Selecting off to the side of the form, press and hold the right mouse button.
2. Still holding the right mouse button down, move the cursor off to the side. This is how you will zoom in and out.
Picture 3 of How to Get Around in 3D Coat
Pan the screen.
1. Hold down the left and right mouse buttons (OR the center one) and move around. This is referred to as panning.

Method 2 of 2:

Picture 4 of How to Get Around in 3D Coat

Select the 1 on the number keypad. This will give you the viewpoint from the bottom of your form.
Picture 5 of How to Get Around in 3D Coat

Press 2 to see your form from the front.
Picture 6 of How to Get Around in 3D Coat

Press 4 to get your form to face 'camera left'. Look at it like this. The 4 is on the same side of the keypad as your form is now facing.
Picture 7 of How to Get Around in 3D Coat

Press 6 to get your form to face 'camera right'. As stated above, your form will be facing the same direction as your number is in the keypad.
Picture 8 of How to Get Around in 3D Coat

Press 7 to view your form from the top. This is the 'flip' side of 1.
Picture 9 of How to Get Around in 3D Coat

Press 8 to see your form from the back.

Update 05 March 2020

You should read it