Normally, if we prepare to install Windows fully and fully, we will perform the step of converting the hard drive format from our computer through CMD Diskpart. But if unfortunately we forget to install Win, then do not worry. There are still ways to help you convert through the CMD command on the computer. In this article, the Software Tips will guide How to convert the GPT hard drive format to MBR while installing Win with the CMD command.
Note: All data in the drive will be lost.
Step 1: First we are at the interface of selecting the drive to install Win. You press Shift + F10 to open CMD.
Step 2: When the CMD window appears, enter the Diskpart command to access Diskpart .
After accessing Diskpart , the root as the item on CMD will display as follows is successful.
Step 3: Next, you enter List Disk to display the list of drives available on your computer.
Step 4: Now you need to determine where the hard drive we installed Windows. You specify and select the drive to convert format with the following command:
Select (drive letter)The drive letter will be in the Disk ### column .
For example:
Select Disk 2
After you enter the command and press Enter , a message will appear that has selected the drive successfully as follows:
Step 5: You proceed to the Clean command to clean the drive you are choosing.
After cleaning the drive you will receive the following message:
Step 6: Finally, enter the Convert GPT command to convert the selected drive format to GPT .
And here are our results after success.
Step 7: After converting the format is complete, you turn off CMD window. Click the Refresh button on Windows Setup to get the new drive format again. Then you can continue installing Windows as usual.
Thus, the software wizard has instructed you on how to convert GPT hard drive format to MBR while installing Win with the fastest CMD command. Good luck!