Google is an extremely useful search engine on the Internet today. With an extremely large data warehouse, Google can exploit a lot of information on the Internet. In this article, the Software Tips will guide you on how to fix errors that cannot access Google on your computer.
1. Check connection with Google server
In this way, we will check with the Test Ping command on CMD to see if the response of the Google server is still stable and send data back on our machine.
Step 1: You launch CMD on your computer by entering CMD in the Start Menu .
Step 2: Then you proceed to enter the following command and press Enter .
Ping Google.com
If the Google server fails, your Received part will be 0 and the Lost part will be 4. As in this case the server still has a response and is not interrupted.
2. Refresh the IP address
If there are many computers on the network, it is possible that there are IP duplicates leading to network conflicts, you can renew your IP address in the network with the following command:
Step 1: You proceed to open CMD by typing CMD in the Start Menu bar and press Enter to launch.
Step 2: Then you enter the following command and press Enter .
Ipconfig / release
After the command has finished running, you revisit your Google to check again. So you have completed the network reset to access Google.
3. Change to dynamic DNS
Step 1: Click on the network icon on the Taskbar and select Network & Internet settings .
Step 2: In the new Settings window, select Change adapter options .
Step 3: Next, right-click on Ethernet and select Properties .
Step 4: In this window, go to Internet Protocol Version 4 (TCP / Ipv4) and double click to edit.
Step 5: Here you proceed to Obtain DNS server address automatically and click OK to finish.
Then you proceed to revisit your Google to check.
If dynamic DNS does not help you solve the problem, you can use DNS provided by Google :
Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4
4. Reboot the network
Sometimes during the operation and working of your network Modem equipment, there are problems of overheating, overloading of access, out of cache, . You proceed to restart your network Modem to check again.
5. Turn off the network card on the computer again
This way we will reset the connection on our computer. Restart the bandwidth to 0 as at computer startup.
Step 1: Click on the network icon on the Taskbar and select Network & Internet Settings .
Step 2: In the new Settings window, select Change adapter options .
Step 3: You right click on Ethernet and select Disable .
Step 4: Now the network icon will be grayed out, right-click and select Enable .
Thus, Software Tips have guided you 5 different ways to fix the error of not being able to access Google. Good luck!