Steps to fix error 0x8004242d when creating computer hard drive partition phân

1. Use Command Prompt to fix error 0x8004242d

In case you cannot format the data on your computer and get an error 0x8004242d, the best way is to use CMD. Commands on CMD have much deeper access and more thorough processing. First, we will use CMD to reformat the hard drive for cleaning and then repartition as usual.

Step 1: Open MenuStart and enter Command Prompt to open CMD on your computer.

Step 2: Then, enter the command below and press Enter to switch to working mode on the drive.

diskpart

Step 3: Next, use the List disk command to view the list of connected drives on the computer.

List disk

In this step, you should rely on the capacity of the drive to find the correct drive that is encountering error 0x8004242d when partitioning, formatting data, .

Step 4: To select the drive to be corrected, you will need the Select command and enter the drive name to select.

Sel 'Drive name in column Disk ###'

For example: In this case, Thuthuatphanmem will handle the error on drive number 0 – Disk 0

Step 5: In order to correctly check the drive one last time before deleting all data and returning it to the original, you will need the command to check hard drive information:

Det disk

The Det disk command will display all the information of the drive on the computer, please check all the parameters and information before Formatting because the lost data will be very difficult to get back. So, please pay attention to choose the correct drive to fix error 0x8004242d.

Step 6: Now, we will come to the step of cleaning the data on the drive and the Clean all command will erase all data (equivalent to Format the drive).

Clean all

Step 7: Finally, after the system finishes cleaning up the data on the drive, you just need to use the Exit command to exit.

Exit

Thus, you have completed the format and cleaning of data on the computer's hard drive. Now try to repartition the drive and check for errors.

2. Scan data on hard drive to handle error 0x8004242d

A simple way is to scan the data on the computer to handle error 0x8004242d quickly. Scanning data will take 5-10 minutes for the next computer boot.

Step 1: Open the Start Menu and enter Command Prompt to open it.

Step 2: To scan data on the computer, specifically to scan the data of the system drive (usually C: drive), we will use the command below.

Chkdsk c: /r

3. Fix error 0x8004242d on motherboard BIOS

Some motherboards provide hard drive protection, which makes Formatting and partitioning the hard drive encounter some unexpected errors. To solve this problem, you just need to adjust a few parameters on the motherboard's BIOS.

Step 1: Restart the computer and press the DEL/F2 key to access the motherboard's BIOS.

Step 2: In the motherboard setup, select the Security tab to open the protection settings.

Step 3: For each motherboard, the name may be different, but the company will leave the common name for the protection setting as Secure Boot, find this setting on the motherboard.

Step 4: Finally, you just need to switch Secure Boot to Disable mode and press F10 => Enter to save the settings.

In this article, Tipsmake has shown you how to fix error 0x8004242d when partitioning and formatting the drive. Good luck!