How to Create a Home Network

Save money, share resources and create a home network. Every computer in your home can be set up in a network environment, making it possible and easy for everyone with a computer to share the same printer and other resources, like files,...

Method 1 of 3:

Set up Your Home Network

  1. Picture 1 of How to Create a Home Network
    Have everything ready before you begin creating your network.
    1. Get any installation CDs you will need. Depending on your computers, you may need network drivers.
    2. Decide on a name for your home network. Most people use their family name, but anything will work.
    3. Write down unique names for each of the computers.
    4. Know what resources you would like to share. These can include printers, files or the Internet connection.
  2. Picture 2 of How to Create a Home Network
    Determine which connectivity method will work best to create your home network. Most people use either an Ethernet connection or a wireless one.
  3. Picture 3 of How to Create a Home Network
    Install your network interface cards (NICs) into the appropriate slot of each computer. You will need either an Ethernet or wireless NIC for network connectivity, depending on the connectivity method you chose.
  4. Picture 4 of How to Create a Home Network
    Be sure you have enough Ethernet cables available for the job, as needed. You will require 1 Ethernet cable for each computer in your home network. These cables come in a variety of lengths, so know what lengths will work best for your network and buy accordingly.
  5. Picture 5 of How to Create a Home Network
    Network 2 computers together using an RJ-45 crossover cable. Connect 3 or more computers to your network with a hub or switch. Be sure your hub or switch has enough ports to handle all the networked computers.
  6. Picture 6 of How to Create a Home Network
    Configure your connection. You'll want to follow the manufacturer's instructions for the connection method you chose.
Method 2 of 3:

Connect Your Home Network

  1. Picture 7 of How to Create a Home Network
    Install network software. You will need to do this no matter what type of connection you plan to use. You should have software included with the Ethernet or wireless hardware.
  2. Picture 8 of How to Create a Home Network
    Follow the prompts to set up your computer. You will need to designate which computer will be the server and which ones will be the clients.
  3. Picture 9 of How to Create a Home Network
    Restart the computers after you install the software.
  4. Picture 10 of How to Create a Home Network
    Create a profile for both Ethernet and wireless connectivity. Your profile will allow you to connect and use the home network.
    1. Run the network software configuration program and follow the prompts to create the profile.
  5. Picture 11 of How to Create a Home Network
    Set the mode to either ad hoc or peer-to-peer, if you're not using an access point. If you are using an access point, set it to infrastructure.
    1. Enter the name of your network.
    2. If using an ad hoc network, all adapters must use the same channel on the network. Set the channel from 1 to 11.
    3. When using an infrastructure network, the client computer automatically configures by itself and selects the channel with the best signal.
    4. To finish this installation, enter the encryption key, according to vendor instruction.
  6. Picture 12 of How to Create a Home Network
    Purchase a high-speed router for your Ethernet wired or wireless solution. This is an easier way to set up a network.
    1. Plug the adapter end into your computer's USB port and put the other end into an electrical outlet.
Method 3 of 3:

Set Up Internet Connection Sharing

  1. Picture 13 of How to Create a Home Network
    Connect your home network to the web. Internet Connection Sharing (ICS) connects all the computers on your network to the Internet using either dial-up or a high-speed connection.
  2. Picture 14 of How to Create a Home Network
    Pop a second Ethernet card into the computer that will host the ICS.
  3. Picture 15 of How to Create a Home Network
    Plug the bridge cable directly into the second card, unless you have a router. If you are using a router, connect the bridge to the Ethernet port on the router and plug the bridge into a power outlet.
  4. Picture 16 of How to Create a Home Network
    Install the CD software that came with your home network kit. You will need to install the ICS software on the host computer, as well.
  5. Picture 17 of How to Create a Home Network
    Install the network configuration software. You will need to input a network password. Enter the same one you used for the bridge.
  6. Picture 18 of How to Create a Home Network
    Repeat the installation process on every computer in your network. Plug the adapter into each computer's USB port. Windows detects the hardware and prompts for the installation of the driver, which should be on the installation CD.
    1. You will need to install the network configuration software, as well. When prompted for a network password, be sure to use the same one you used for the bridge.
  7. Picture 19 of How to Create a Home Network
    Restart your computer to complete your connection.
Update 24 March 2020
networkcomputerethernetconnection

You should read it

Maybe you are interested

Category

System

Mac OS X

Hardware

Game

Tech info

Technology

Science

Life

Application

Electric

Program

Mobile