Boot Failure Detected Error – Pocket the Fix Now

TipsMake has helped you solve the Boot Failure Detected error quickly and effectively. Check it out now if you are stuck with this problem!

Starting up your computer seems like a simple task, and it's done in a minute. But no, sometimes your device misbehaves, making this process not go smoothly, or even unable to turn on. In particular, the Boot Failure Detected error is also very common and many people don't know what to do. No need to worry, TipsMake has effective solutions available.

Instructions on how to fix Boot Failure Detected error

The sudden interruption of computer startup with the message 'Boot Failure Detected' can make many people confused. The full message has many cases such as 'Boot failure detected can t click anything', 'Boot failure detected Gigabyte'. The cause may be related to the operating system boot process, often originating from the hard drive, BIOS/UEFI settings or system errors. So how to fix boot failure detected Windows 10/11? Here's what you need to do:

1/ Run Startup Repair to fix the problem

When you encounter the error 'Boot failure discovered', you can use Startup Repair - Windows' built-in utility to quickly handle the problem.

1. Step 1 : First, you need to learn and boot your computer into WinRE (depending on the computer model you are using).
2. B2 : When you are in WinRE, you need to click on Advanced options .
3. B3 : Next, click on Troubleshoot > Advanced options > Startup Repair .

 

1. B4 : Finally, the user follows the instructions on the screen to complete.

2/ Reset BIOS settings to default state

As the admin shared, 'Boot Failure Detected' may be related to BIOS. Therefore, resetting BIOS to default is also an effective way that you should apply:

1. Step 1 : Boot your computer into BIOS mode (depending on the computer model you are using).
2. B2 : Find lines like 'Load Setup Defaults' , 'Load Default Settings' or similar names.
3. B3 : You select this option to reset BIOS settings to default values ​​> Then, save the changes and exit BIOS.

3/ Rebuild MBR

You need to know that MBR is an important component that is responsible for helping the system locate and load the operating system during the boot process. If the MBR is damaged or corrupted, it will lead to the system not being able to find or load Windows. Therefore, boot errors may occur in this case. To fix this, rebuilding the MBR is the trick that requires:

Step 1 : Access the Advanced options screen (as in instruction 1) > Then select Command Prompt .

Step 2 : Type the following commands and press Enter after each command to run the command.

1. bootrec /fixmbr
2. bootrec /repair boot
3. bootrec /rebuildbcd

Some other solutions when Boot Failure Detected error occurs

In addition to the above reasons, outdated software can also be the 'culprit' causing compatibility issues with newer hardware or software. This leads to boot errors. Therefore, you should perform a BIOS update using USB to fix the error and restore normal boot operation.

It is possible that the CMOS battery is weak or damaged, causing the boot error. Because the CMOS battery is responsible for storing basic system settings, including date, time, and hardware configuration. Therefore, you should also try replacing the CMOS battery to see if it can be fixed!

Above are the details on how to fix the error Boot Failure Detected. TipsMake wishes you success in fixing it!

1. Win 11 does not have Local users and groups, what should I do?
2. Remote Desktop has black screen – Share how to fix