Instructions on how to install Windows 10 with USB step by step

In the process of using a computer, surely we will inevitably encounter errors such as: virus infection, system error . etc . If the error is small, we can overcome it by simple methods, but if If the error is too bad, the only solution is to reinstall Windows. However, the problem is that not all of us know how to install windows and if installed incorrectly the pig becomes a lame pig. Therefore, to help you avoid those cases, the following article of Thuthuatphanmem.vn will guide you how to install windows 10 with USB in details from a to z. Please follow along.

1. Prepare before installing windows.

To install Windows 10 with USB, you must first prepare the following:

1. A USB with 4Gb capacity or higher.
2. ISO file of Windows 10 installer
3. USB creation software for installing Windows Rufus (Download link: https://rufus.akeo.ie/)

2. Create a USB to install windows 10

Step 1 : You attach the USB to the computer and open the Rufus software.

Then select the items as shown below, where:

1-Select the USB connected to the computer

2-Select the USB format as NTFS

3-Select the file format to install windows as ISO

4-Select the Windows 10 ISO file in your computer (prepared in part 1)

5-Click Start to start creating USB to install windows.

Step 2 : If a message appears, click OK

Step 3 : Wait a while for the process of creating USB to install Windows is completed.

When creating a USB to install windows successfully, click Close to exit the program. And prepare to install windows.

3. Steps to install Windows 10

Step 1 : You attach the Windows installation USB created in the previous step to the computer (power off), then turn on the computer to the BIOS and select boot from USB. To enter the BIOS you do the following:

Desktop computers : Depending on the different types of main but most to enter the BIOS press  Delete , on the Boot menu   press  Esc  or F11 , F12 .

Sony Vaio Laptop : Turn off the power, then press the Assist button   and then press  F2  to enter the  BIOS . To enter Recovery, press  F10 .

Laptop HP:

1. Enter BIOS and press F10
2. Go to Boot menu and press F9

Lenovo Laptop:

1. Enter BIOS and press F1
2. Go to Boot menu and press F12

Dell Laptop:

1. Go to BIOS and press F2
2. Go to Boot menu and press F12

Acer Laptop:

1. Go to BIOS and press F2
2. Go to Boot menu and press F12

Asus Laptop:

1. Go to BIOS and press F2
2. Go to Boot menu and press Esc

After choosing to boot into USB, wait for a while for the computer to boot into the Windows 10 installation interface.

Step 2 : At the installation interface windows 10 you select the items as shown below and click Next .

Step 3 : Select Install now.

Step 4 : Choose one of the versions of windows 10 then click Next .

Step 5: Check the box then click Next .

Step 6 : Select Custom: Install windows only

Step 7 : Select the drive to install Windows, normally the computer will be divided into many different drives (the drive where the Windows installation of the Type column will be listed as System). Here I installed on the virtual machine, so there will be only 1 drive. You select the drive then press Fomat to delete all the old data and finally click Next .

Step 8 : The process of installing Windows starts, you wait about 10-15p depending on the speed of each computer.

Step 9 : After the installation process is complete the computer will automatically restart, you wait a few more minutes. When the computer boots into the screen as below, select your country and click Yes.

Step 10: Choose your keyboard language and then click Yes.

Step 11 : Click Skip

Step 12 : Select Set up for personal use then click Next .

Step 13 : At this step, if you have a Microsoft account, enter it in the box and click Next , otherwise choose Offline account. It is best that you choose Offline account because Microsoft account can be entered after installing win.

Step 14 : Click Yes

Step 15 : Enter the computer name in the box and click Next .

Step 16: If you want to set a password for the computer, enter it in the box and click Next, if you do not want to set a password, leave it blank and click Next .

Step 17 : Here windows asks if you want to use the virtual assistant Cotana, I should not use No.

Step 18 : In this step you can turn off all the items and click Accept.

Step 19 : Wait a few minutes to complete the installation of windows.

And so we have successfully installed windows 10, the computer has booted to the Desktop.

Above Thuthuatphanmem.vn has detailed instructions for installing Windows 10 with USB, you can see that installing Windows is not as difficult as we usually think. Hope the article will be helpful to you. Good luck!