Midea means the most common air conditioning and air conditioning codes

Although it is not frequent, there are cases where Midea air conditioner fails during operation. Both users and repairers should know the meaning of Midea air-conditioner and air-conditioner codes for the most accurate and timely remedy. Find out more about this issue through TipsMake.com's share.

Midea air conditioner error code wall mounted

Midea air conditioner error code

Report an error on the lamp

Description of the error

How to fix errors

E1

-

Room temperature sensor error.

- Check the board connector and sensor connector.

- Measure sensor resistance values.

- Replace the sensor or the entire indoor unit board.

E2

-

Connection signal error from the board.

- Check the signal and power connection wires.

- Remove the plug-in board again.

- Replace the new board.

E3

-

Error supplying power to indoor unit.

- Check the signal connection cable.

- Use motor rotation hand.

- Replace new motor for indoor unit.

E4

-

Voltage or power failure.

- Check voltage, power source.

E5

-

Indoor temperature sensor error.

- Contact the service center for processing.

E6

-

Short-circuit temperature sensor of the indoor unit.

- Check the motherboard sensor jack.

- Check sensor resistance.

- Replace the board for cold storage.

E7

-

The temperature sensor of the indoor unit is short-circuited (the E7 error code is only available in 2-way Midea air conditioner).

- Check the motherboard sensor jack.

- Check sensor resistance.

- Replace the board for cold storage.

EC

-

Midea air conditioner reports EC error may be related to gas pressure or pipeline due to gas leak, gas shortage, distortion pipeline to make gas, .

- Check the plug and pipe head.

- Go back to the pipe if it has a problem.

Midea air conditioner error codes are bare

Error code regulates Midea

Report an error on the lamp

Description of the error

E0

-

Other wire signal error

E1

-

Connection signal error from the board

E2

Timer light blinks

Air sensor error

E3

Operation lights flash

The E3 error regulates Midea in relation to indoor indoor sensors

E4

The DEF / FAN lamp blinks

Outdoor sensor sensor error

F4, ED, E6

All 4 lights blinked

Phase error, pressure, board

E7

-

Chipset, board error

E5, EE, E8

Alarm light blinks

Water level control switch error

EB

-

Internal motor speed error

F1, F2

-

LED display, connecting wire

F3

-

Error connecting internal wiring

FC

-

Gas and gas congestion

-

All 4 lights blinked

Pressure error, phase, signal wire

Error code regulates Midea vertical cabinet

Midea air conditioner error code

Report an error on the lamp

Description of the error

E1

-

Error of signal wire touching another wire.

E2

-

Connection signal error from the board

E3

-

E3 error regulates Midea vertical cabinets related to air sensors.

E4

-

Error in indoor staging sensor

P4

-

Outdoor sensor sensor error

P5

-

Phase error, pressure, board

E6

-

Chipset, board error

-

All 4 lights blinked

The water level test switch has a problem.

Hopefully , the air conditioner error code, Midea air conditioner , the wall, ceiling, ceiling, and wall mounts that we provide will be useful to you. Visit META.vn for more advice on regulating Midea!

>>> More references:

1. What is the error of the air conditioner flashing continuously?
2. Air conditioning does not work, causes and remedies
3. What is the best way to buy air conditioner using gas?
4. Air conditioner with gas leak is dangerous, how to handle it?
5. Air conditioner, LG air conditioner has any error codes? What is the cause?