Detailed summary of common error and trouble codes in air-conditioners and air conditioners Sharp

During operation, the Sharp air conditioner may encounter some errors or problems that affect the performance. Regardless of whether you are a user or repairer, you need to know the codes of air conditioner, air conditioner and some other common problems to take corrective measures. Do not miss our article if you are interested in this issue.

Sharp air conditioner error codes

Errors and malfunctions during operation are inevitable for air-conditioners and air conditioners, including Sharp. When an error occurs, the Sharp air conditioner LED displays error code. You just need to look up that code on the Sharp harmonic error code below and find out the appropriate solutions:

Sharp air conditioner error code

Error name

Sharp air conditioner error code

Error name

E0

Error pumping water

E7 21

Laser sensor failure (cyan)

E

High pressure error

E7 22

Incident of laser energy (magenta)

E2

Error of cooling unit of compressor

E7 23

Incident of laser sensor (yellow)

E3

Compressor error operates under low pressure.

E7 24

Incident of laser beam (black)

E5

Compressor error is overloaded.

E7 25

Laser beam incident (cyan)

E6

Line error

E7 26

Incident of laser beam (magenta)

E8

Error of fan in indoor unit

E7 27

Incident laser beam (yellow)

E9

Water overflow error

E7 30

Incident rom icu

F0

Error of indoor unit environmental sensor error.

E7 90, E8 0, E8 1

Main problem

F

Sensor device error

F1 0

CPU information error

F2

Error sensor agglutination

F1 10

The main error

F3

The outdoor unit sensor is broken

F1 11

Operation problem

F4

Defective gas discharge sensor

F1 15

Error lifting tray

F5

Error outdoor sensor

F1 19

Incident link forward

EE

Error of button being locked

F1 20

Incident link behind

E7 20

Error of laser sensor (black)

F1 70

Problem controlling BWP

Some other common problems on Sharp air conditioners have no error codes

In many cases, air conditioner Sharp is broken, but it does not report the error code on the LED screen. Here are a few problems not showing common error codes on Sharp air-conditioners that you should care about:

1. Air conditioner Sharp does not run, not up source

1. Cause: Power supply is broken; interrupt due to overload or failure; transformer failure; broken wires.
2. Remedies : Check the power, maintenance, transformers and wires to see if it is normal, need repair or replace.

2. Room temperature is higher than customized temperature

1. Cause : Because the room is not closed; air conditioning is out of gas, gas leakage; The compressor or fan of outdoor unit has trouble.
2. Remedy : Check that two copper wires are directly connected to the outdoor unit. If they are not cold, there is no standing water, then surely the air conditioner will run out of gas or gas leak. In the opposite case, check if the outdoor unit fan is running slowly.

3. Sharp air conditioner runs and stops itself then runs again

1. Cause : Sharp air conditioner is overloaded or weak voltage.
2. Remedy : Turn off the electricity to regulate the rest for 2-3 hours and then use it again. If the conditioner still cannot work properly, you need to check the transformer.

Please save the air conditioner error code, Sharp air conditioner to apply in your case. Visit META.vn for more detailed advice on Sharp air conditioners and air conditioners, quality and cheap price.

>>> More references:

1. Air conditioner, LG air conditioner has any error codes? What is the cause?
2. Midea means the most common air conditioning and air conditioning codes
3. Learn the most common Mitsubishi air conditioner fault codes
4. [Summary] Causes and ways to fix error codes Air conditioner, Gree air conditioner
5. Structure & Principle of operation of air conditioner, air conditioner