How to Recharge LeapPad2

The LeapPad2 is an educational tablet designed for children three to nine years old. It has built in cameras, a computer and a stylus-based touchscreen. This device takes four AA batteries of any brand or type, with a suggested battery...

Method 1 of 3:

Replacing/Recharging Batteries

  1. Picture 1 of How to Recharge LeapPad2
    Purchase a pack of four fresh AA batteries. Open the two battery compartments at the back of your LeapPad2. Install the batteries; making sure the symbol on the battery corresponds with the symbol in the battery compartment.[1]
  2. Picture 2 of How to Recharge LeapPad2
    Use batteries of the same type. You should also only install four fully charged batteries at once, instead of mixing partially charged batteries with fully charged batteries.
  3. Picture 3 of How to Recharge LeapPad2
    Opt to use rechargeable batteries made of nickel metal-hydride. 200mAH or higher is recommended. Purchase at least eight batteries, so that you can recharge a set while another is in use.
    1. It is a good idea to purchase rechargeable batteries and a battery charger at once so that you can guarantee compatibility.
    2. You can also move on to the next method to buy a LeapPad2 brand recharger kit.
  4. Picture 4 of How to Recharge LeapPad2
    Power down your LeapPad2 when your child stops using it to conserve battery life. Rechargeable batteries will deplete slowly even when not in use.
Method 2 of 3:

Using a Recharging Pack

  1. Picture 5 of How to Recharge LeapPad2
    Purchase the special LeapPad2 Recharger Kit from a box store, online retailer or toy store. These kits can vary from $28 to $50.
  2. Picture 6 of How to Recharge LeapPad2
    Attach the two rechargeable batteries together and plug them into the AC Adaptor to charge them when they are empty.
  3. Picture 7 of How to Recharge LeapPad2
    Separate the batteries and install them in the battery slots, where you would normally put AA batteries.
  4. Picture 8 of How to Recharge LeapPad2
    Repeat every nine to 10 hours. You can also plug in the AC adaptor directly to the LeapPad2 if your batteries aren't recharged.
  5. Picture 9 of How to Recharge LeapPad2
    Buy another Recharger kit to have extra batteries on hand.
Method 3 of 3:

Using an AC Adaptor

  1. Picture 10 of How to Recharge LeapPad2
    Use the AC adaptor that came with the LeapPad2 Recharger kit. You can also purchase a Leapster or Didj AC adaptor.
  2. Picture 11 of How to Recharge LeapPad2
    Insert the adaptor into an electrical outlet in your wall. It is best to use one at a low level, near a chair or table. Your child will be able to use the device when it is plugged in to the wall.
  3. Picture 12 of How to Recharge LeapPad2
    Keep the AC adaptor plugged into the wall at night if you are using the LeapPad2 recharger kit. Remove the recharger kit batteries and attach them to the charger kit. Then, allow the batteries to charge all night.
  4. Picture 13 of How to Recharge LeapPad2
    Reinstall the batteries in the morning. Batteries will allow the child more flexibility and mobility when using the LeapPad2 than the AC adaptor.
Update 05 March 2020
Category

System

Mac OS X

Hardware

Game

Tech info

Technology

Science

Life

Application

Electric

Program

Mobile