How to Make a Coffee Cup Using Blender
Want to make a cup type of image in Blender? Don't know where to start?? Well, this article will take you from the beginning to the end of the process. * Screenshots are from a Windows computer and Blender 2.68 Be sure that you have the...
Part 1 of 8:
Making the Bowl of the Cup
-
Picture 1 of How to Make a Coffee Cup Using Blender - In the lower left, go to the Add Cylinder options. It may appear differently depending on your version of Blender.
-
Picture 2 of How to Make a Coffee Cup Using Blender -
Picture 3 of How to Make a Coffee Cup Using Blender -
Picture 4 of How to Make a Coffee Cup Using Blender Picture 5 of How to Make a Coffee Cup Using Blender -
Picture 6 of How to Make a Coffee Cup Using Blender -
Picture 7 of How to Make a Coffee Cup Using Blender - Press 1 to change your view of the cylinder.
- Press 5 to change the perspective. Even thought it is still a cylinder, it will look like a square because of your perspective.
-
Picture 8 of How to Make a Coffee Cup Using Blender Zoom in closer, be sure your mouse is over your object and then press CTRL R. Keeping your cursor over the object, use your scroll wheel and roll it up until there are 4 lines. -
Picture 9 of How to Make a Coffee Cup Using Blender - Press A to deselect everything.
-
Picture 10 of How to Make a Coffee Cup Using Blender - Shorten the top section. Click on the blue arrow and move the selected vertices until they are shorter.
- With the selection still made, press S (Scale) and then type in .9 and then Enter.
- Deselect everything (the A key).
-
Picture 11 of How to Make a Coffee Cup Using Blender - Type S (Scale) and the 1.45 and Enter. This will slightly enlarge the center of the cup.
- Deselect everything.
- Press B and select the bottom vertex.
- Type S, then .8 and then Enter.
- Deselect everything.
- Go to Edit Mode, switch back to Object Mode and change Wireframe to Solid
Part 2 of 8:
Making the Coffee Cup Handle
- Move your coffee cup to the side so that you have room to work. To do this, hold down the Shift key and the middle mouse button and move your cup to the side; left in the video.
-
Picture 12 of How to Make a Coffee Cup Using Blender - With your most recent selection (the Path) still selected, change the Object Mode to Edit Mode. This will leave you with five nodes to edit.
-
Picture 13 of How to Make a Coffee Cup Using Blender -
Picture 14 of How to Make a Coffee Cup Using Blender Start moving the nodes to put the handle in the basic shape it will need to be in, to be a handle. This will vary from person to person. Just move it into the correct position.-
Picture 15 of How to Make a Coffee Cup Using Blender
-
- Start fine-tuning the handle. You want it to connect about midpoint between the sections shown above. Get a good shape, but have it not quite touching the body of the cup.
- Switch from Edit Mode back to Object Mode.
- Deselect everything.
- Go to Add >> Curve >> Circle.
- Press S and then .2 and Enter. This will make it quite a bit smaller. You will be using it to give your handle its shape.
- Look at your upper right hand corner where the description of the scene should be. If you see Bezier Circle, then you are where you need to be. If not, backtrack your steps and determine what went wrong.
- To apply the shape to your handle, right click on the handle to select it.
-
Picture 16 of How to Make a Coffee Cup Using Blender -
Picture 17 of How to Make a Coffee Cup Using Blender - Start making changes to the circle. Any changes that you make to the circle will change the handle.
- Don't be alarmed at the shape that the circle (and handle) becomes.
-
Picture 18 of How to Make a Coffee Cup Using Blender - Delete the circle/square. You no longer need it.
-
Picture 19 of How to Make a Coffee Cup Using Blender Check to make sure that your handle placement is good. Move the cup over so that it is centered on your screen and press 7 (on the right hand keyboard). This will give you a viewpoint of looking straight down on the cup. - If your cup and handle are too far apart, select the cup and move it so that it is closer to the handle. Use the arrow to move it laterally.
- Join the cup and the handle together so that they are one object.
- If your cup is selected, leave it selected. Hold down the shift key and right click on the handle.
- Press CTRL J. This will make them one object.
- Select Edit Mode. You are going to be connecting them together now.
-
Picture 20 of How to Make a Coffee Cup Using Blender -
Picture 21 of How to Make a Coffee Cup Using Blender Move your cup so that you are 'behind' the handle. You are doing to be deleting some faces before connecting the handle. Underneath the handle (from this angle), select one of the faces, as shown in the screen shot. Press the SHIFT key and right click on the other one. -
Picture 22 of How to Make a Coffee Cup Using Blender - Here is what your cup should look like, approximately. Notice the empty spaces under the cup handle. That is what you just did.
Picture 23 of How to Make a Coffee Cup Using Blender
- Here is what your cup should look like, approximately. Notice the empty spaces under the cup handle. That is what you just did.
-
Picture 24 of How to Make a Coffee Cup Using Blender Change your angle of view again and be looking 'down' into the handle, as seen in the screenshot.
Part 3 of 8:
Connecting the Cup and the Handle
-
Picture 25 of How to Make a Coffee Cup Using Blender - Once you have done that, press the edge (left edge of the handle in the screenshot).
Picture 26 of How to Make a Coffee Cup Using Blender - Hold down the SHIFT key, then press the other two edges that you see selected.
- Press F. This connects the edges into one face. Repeat for the other side.
-
Picture 27 of How to Make a Coffee Cup Using Blender -
Picture 28 of How to Make a Coffee Cup Using Blender Do the same for the bottom part of the cup handle. Three on the outside connections, two on the inside. - Save your work.
Part 4 of 8:
Building the Inside of the Coffee Cup
-
Picture 29 of How to Make a Coffee Cup Using Blender - Press 1 to get a front view of your cup.
-
Picture 30 of How to Make a Coffee Cup Using Blender - Press B and then select the top vertices.
- Press E (Extrude) and then press Enter.
- Scale the top of the cup. To do this:
- Press S
-
Picture 31 of How to Make a Coffee Cup Using Blender
- Press the number 1 to get a front view.
-
Picture 32 of How to Make a Coffee Cup Using Blender With the top vertices still selected, press E. After you press E, press Z. This will keep it going straight up and down. Take it down to the next set of vertices and press Enter. -
Picture 33 of How to Make a Coffee Cup Using Blender Press S and scale the inside until it is parallel with the outside of the cup. Press Enter. -
Picture 34 of How to Make a Coffee Cup Using Blender Repeat this process until you get to the third vertices. -
Picture 35 of How to Make a Coffee Cup Using Blender Press E to extrude but this time don't stop at the vertex. Go down about half the distance again, as in the screenshot. -
Picture 36 of How to Make a Coffee Cup Using Blender Press S to scale the bottom and bring it in, but not as much as you have been. It will vary from project to project, but approximate what you see in the screenshot. - Press E and then Enter.
- Merge all of the points that you have been manipulating up until now (bottom of the coffee cup).
- Rotate it just a bit so that you can see the bottom surface when created.
- Go to your left side tool bar and find the Remove group. Select Merge and then At Center.
Picture 37 of How to Make a Coffee Cup Using Blender
- Change the Display method to Solid and Edit Mode to Object Mode.
Part 5 of 8:
Touching Up Your Coffee Cup
- Smooth the edges of your cup by going to your left tool bar and go to Shading >> Smooth.
- Select the wrench on the right side.
- Add Modifier
- Subdivision Surface
- In the Subdivisions section, change both the views and renders to 3.
- Click on the World button to edit the material (the look of your cup).
-
Picture 38 of How to Make a Coffee Cup Using Blender Click on New and select Mix Shader.- If your options don't look like this, then check to make sure Cycles Render has been chosen.
- Click on the first Shader drop box and select Diffuse BSDF.
- Change the color to a light gray.
- Click on the second Shader drop box and this time choose Glossy BSDF. is is the one that will determine the color of your cup.
- If you want to see what your cup will look like, go to the Viewport section and give it a similar color and your cup will become that color.
- Change the Roughness to 0 (zero).
-
Picture 39 of How to Make a Coffee Cup Using Blender - Save your work.
Part 6 of 8:
Making a Tabletop
- Click to just below the coffee cup to give the table a good origination.
- Go to Add >> Mesh >> Plane and add a plane to just below your cup.
- Select S, 3, and then Enter. This will 'grow' the table three times its current size.
- Zoom in closer to the bottom of the cup and, by using the BLUE arrow, get the plane as close as possible to the cup.
- Go to the right toolbar; the World icon should still be selected.
- Click on New and then go with the default Diffuse BSDF option.
- Click in the white bar and change the color to whatever you want. Make sure it complements your coffee cup.
Part 7 of 8:
Lighting the Scene
-
Picture 40 of How to Make a Coffee Cup Using Blender Zoom out from your cup until you see the camera. Click behind it like you see in the screenshot. This will give you a point of origin for your light source. - Go to Add >> Mesh >> Plane. Notice the angle of the plane. It won't provide any light to the cup in that position.
- Click on R (Rotate) and then press 45. That will give you the correct angle to light your cup. You could also turn it freehand if you wanted to.
- Increase the size by 5 times. Press S for scale, press 5 and then enter.
- Set the material for the light.
- Click on New and for the Surface, choose Emission. This will allow it to light the cup.
- Change the strength to 10.
- Press 0 and then 5. This will allow you to see it as the camera sees it.
- Change the scene around through the camera. This will enable you to get the best angle of your work. Otherwise, you are stuck with the one you get.
- Go to the View menu and then select Properties. Then select Lock Camera to View.
- After you lock camera to view, then go back to Properties and click it again.
- Move your cup around until it has the look you want.
Part 8 of 8:
Rendering Your Coffee Cup
-
Picture 41 of How to Make a Coffee Cup Using Blender - Since this is just a quick render to see how it looks, it shouldn't take long to do this.
Picture 42 of How to Make a Coffee Cup Using Blender
- Since this is just a quick render to see how it looks, it shouldn't take long to do this.
- Under Sampling, change the Render to a higher number, (500 is used here) and change the Clamp to 0.98.
- Press Render again and then wait.
-
Picture 43 of How to Make a Coffee Cup Using Blender Once it is done and you want to save or share it, hover your mouse over your cup and press F3. Then save your work. Great job!
Update 05 March 2020
You should read it
- How to handle when the computer is infected with the Advertising Virus
- How to Fix Windows 8.1 Crashes
- Should choose a normal juicer or a slow press?
- How to Set the Time on One‐Buttoned LED Watches
- How to Boot into Safe Mode on Mac OS X or Windows
- How to set up the Xbox One gaming console on Windows 10
- Pocket the address to buy the best French Press French coffee maker
- Microsoft has allowed the use of the Xbox One handle on Windows
- Photoshop for everyone: Create caricatures
- How to Restore Deleted Files in Windows XP
- How to press the Sino audio wall wire
- How to Replace an RV Waste Valve Handle
Maybe you are interested
Intel admits it will take 2 years to catch up with the competition What are AIFF, AIF and AIFC files? How to link Twitter posts into a topic on iPhone and iPad Facebook supports unlocking accounts with facial recognition How to take care of Lan Ho Diep after the Lunar New Year to continue flowering Instructions on how to make a unique Halloween paper mask