3 common errors on air conditioner remote and how to fix it

Remote air conditioning is having some minor problems that make you feel uncomfortable every time you use it. So do you have a good way to fix it? If not, then follow the instructions of the air conditioning repair technicians shared in the article below to find the best solution and this situation will no longer be repeated.

1. 4 ways to turn on the air conditioner without using control
2. How to control the air conditioner to save electricity?
3. Air conditioner control application on iPhone

1. Control without a 'beep' sound but still on the picture

Most air conditioning controls emit a "beep" sound when we press the button to either adjust the temperature or use certain functions. However, if one day suddenly you can no longer hear this familiar sound even though the screen is still displayed, it is likely that the remote god's eye (the part above the air conditioner controller) is meeting. Some problems like: Being stuck with dirt, the electrical part of the eye is black, .

How to fix:

Use a soft, dry towel and wipe the air conditioner remote eye. After cleaning, it is best to place the remote air conditioner on the shelf or on the wall when not in use. Limit the placing of air-conditioner remote on the bedside or furniture to prevent the remote being blocked or watery, which will damage the eye of the air conditioner remote.

2. Control lost screen

As we know, the remote display shows us the function or temperature being adjusted. When you can no longer see the remote screen displayed, the chances are high because the battery is rusted. The battery's head is in poor contact, causing the remote board and battery to lose the path.

How to fix:

For this situation, you need to remove the old battery and shave off all the rust remaining in the contiguous part of the battery. After that, reinsert the new battery for use.

3. Control has a flickering screen

Add a common error on the air conditioner remote that many users complained about was that the monitor had a flickering screen. In fact, the cause of this error is because the control was dropped or previously blocked, causing the control circuit to be exposed on the remote (even if the remote joints are flipped, loose), leading to the phenomenon of screen flicker. In addition, low battery failure can also cause the air conditioner remote display to display, at no time.

How to fix:

Normally, the remote control battery has a life of about one year. Therefore, when you find an error on this remote air conditioner, you need to check the battery, if all else you need to replace the battery to regulate normal operation again. If the problem is accidentally dropped the remote several times, you should ask the refrigeration technician to repair and replace it if necessary.

Some notes when using air conditioner control:

1. Periodic conditioning is required to remove dirt and mold.
2. To make the remote more durable, you can equip an external cover to limit water and reduce the impact force when dropped sharply.
3. After a period of use, if the remote screen is blurred, the light is weak, when you press it at no time, you should replace the new battery for remote operation more stable.

See more:

1. How to clean the air conditioner properly?
2. Maintain conditioning and things you need to remember
3. This summer, should a misting fan, steam fan or air conditioner be selected?