Test on system maintenance P1

All devices and machines can only operate in the best state when maintained, regularly maintained and the computer is no exception. Below the Network Administrator will send you questions about the topic of system maintenance. Invite you to consult.

  1. Question 1. How many bits of AGP bus?
    1. 8
    2. 16
    3. 32
    4. sixty four
  2. Question 2. Which 800x600 screen resolution is equivalent to the following video type?
    1. EGA
    2. VGA
    3. CGA
    4. SVGA
  3. Question 3. The first step into diagnosing a completely dead computer is working well the day before?
    1. Check the energy supply
    2. Replace the CMOS battery source
    3. Equip new hard drive cable controller
    4. Check AC exit way for voltage
  4. Question 4. When you start the computer light on the light control lamp and hang up. This means?
    1. Data cable has not been inserted into the hard drive
    2. There is a disk during boot
    3. There is no disk during boot
    4. The function of the control disc is not proper
  5. Question 5. You set up a 2nd IDE, it is not visible in Windows explorer. Which of the following options to indicate that error?
    1. Your hard drive is not split. The BIOS is not updated
    2. The floppy disk is not connected
    3. The operator is wrong
    4. Regitry is damaged
  6. Question 6. You have just installed Windows and inserted the installation CD from the CD ROM drive. When you restart the system you receive the message "Bootable CD ROM device cannot be found" (the boot CD is not found). Which of the following options to fix that error?
    1. Reinstall the CD ROM driver
    2. Verify that the MSCDEX.EXE file is loaded in AUTOEXEC.BAT
    3. Changes in BIOS entries boot sequence to A, C, CD-ROM
    4. Replace the hard drive and FDISK is run and reinstall the operating system
  7. Question 7. Install a new CD-Rom drive on the second controller, which it shares with an external memory device IDE. Now what does a device do you have to do?
    1. Install new drivers
    2. Check the master / slave jumpers
    3. Change another cable
    4. Delete the drivers for the external storage device and restart the computer
  8. Question 8. When you reset the settings, Windows now seems to be mixed. What is the first step you need to do to solve the problem?
    1. Replace the video card
    2. Boot the computer in safe mode (Safe Mode)
    3. Change the screen cable
    4. Change Video settings in BIOS
  9. Question 9. When you add a slave hard drive to a PC, when you restart the computer just for a blank screen. What is the most appropriate cause?
    1. The floppy drive cable is faulty
    2. Error of CMOS configuration
    3. Connect the hard drive cable
    4. The slave hard drive is not compatible
  10. Question 10. In Windows, your screen image is distorted. Which of the following is an option to isolate this problem?
    1. Try the screen, or start the computer with a command prompt
    2. Try running the program
    3. Replace the energy supply
    4. Video memory settings
Update 24 May 2019
testinginformation technology testingsystem maintenancenetwork testingcomputer network testinggood testing

You should read it

Maybe you are interested

Category

System

Mac OS X

Hardware

Game

Tech info

Technology

Science

Life

Application

Electric

Program

Mobile