Testing of system maintenance

The Network Administrator will then send you a set of multiple-choice questions about system maintenance. System maintenance will help you minimize system problems, which can increase customer productivity and profitability.

Question 1. You are an IT technician. Piter is a regular user because of his job reporting. He wants you to show him the laptop he turned off the computer when he moved the report location without turning off the open applications. What should you do?
1. Show him the Stand by feature in Power Option
2. Show him the Hibernate feature in Power Option
3. Show him the Hibernate feature in Power Option and perform StartTurn off Computer shutdown, choose Hibernate
4. Show him the StartTurn off Computer shutdown, select Hibernate
Question 2. Your computer has a hard disk containing 3 logical C, D, and E drives, each 4GB of capacity has 1 GB available. The paging file is located on the D drive. The total physical memory of your device is 196MB. Your computer installs Windows Xp pro. Every day after working for an hour, your computer is slow about 15 seconds after receiving an "System is low on vitual memory" error message. You need to improve the operation of the machine. You do not want to install more memory. What should you do?
1. Increase the initial size of the paging file
2. Move the current paging file to the system drive
3. Increase the setting of Buffers in the Config.sys file
4. All is not possible
Question 3. You are an IT technician for Newepoch company. The company is using 2 operating systems on each machine. The default operating system is Windows 2000 advanced. Piter is a user in the company, he wants to turn on the device after 10 seconds if not selected, the machine will start Windows XP pro operating system. If you have access to Windows XP pro then you need to show Piter to any of the following?
1. Right-click My computer, select Properties, then select the Advanced tab
2. Right-click My computer, select Properties, then select Startup and Recorvery
3. Go to startrun, type config and change in there
4. Go to startrun, type cmd and change in there
Question 4. You are an IT technician for Newepoch-911 company. The Piter is a customer calling to ask you why when he used a boot disk on DOS, there was no C drive. He suspected that his hard disk was broken, but when he booted into Windows Xp pro, he still found the C drive intact. Piter needs you to state the cause. What do you think is the reason?
1. Your C drive is hidden
2. Your C drive is formatted according to NTFS
3. Your C drive will become a D drive when entering DOS
4. Your hard drive is hidden
Question 5. The process of refreshing (refreshing memory) is the process of .?
1. The examination of registration numbers (registers) Chip memories
2. Cleaning up memories for reuse
3. Reloading or re-stimulating registration numbers (registers)
4. Removing memory (memory) before closing the system
Question 6. Which of the following options must be changed when added to the hard drive?
1. Voltage
2. DMA channel
3. Jump selection and cable orientation
4. Controller address
Question 7. Do statistics measure time for CRT beams of electrons to draw from top to bottom in a screen?
1. Pixels (Dot Pitch)
2. Combined together (Interlacing)
3. Video Memory (Ram video)
4. Refresh factor (refresh rate)
Question 8. Which of the following options is considered to interrupt CPU operation?
1. Address in and out (I / O address)
2. Interrupt Request (IRQ)
3. Memory address (memory address)
4. Direct memory access (DMA)
Question 9. What is the most important precaution when upgrading the BIOS?
1. Restart the computer
2. Unplug all connectors
3. Record settings
4. Store the files that upgrade the BIOS to a floppy disk
Question 10. The main parts of the CPU
1. PU, CU, ALU
2. PU, ALU and register
3. ALU, CU and register
4. CU and Cache memory