How to Format a Pendrive if Windows is Unable

If your USB drive is not being recognized by Windows, or is not formatting properly, there may be problems with either Windows or the USB drive itself. If the problem is on Windows' end, you can usually solve it by reinstalling the USB...

Part 1 of 4:

Try This First

  1. Picture 1 of How to Format a Pendrive if Windows is Unable
    Connect your drive and open Disk Management. This is a Windows utility that allows you to manage all of your connected disks. Your drive should appear in this utility, even if it isn't formatted properly.
    1. Press the Windows key + R and type diskmgmt.msc. This will launch the Disk Management Utility.
    2. Look for your USB drive in the list of connected drives. If your USB drive is listed, it may not be formatted correctly. Click here for instructions on trying to format it. If your USB drive is not listed, read on for some troubleshooting tips.
  2. Picture 2 of How to Format a Pendrive if Windows is Unable
    Plug the drive into another USB slot. Before continuing, the quickest troubleshooting method you can try is plugging the USB drive into another USB port on your computer. Be sure to try a port directly on the computer, not a USB hub.
    1. If the drive works in another USB port, the first one you tried is likely dead. There's not much you can do about this short of replacing your motherboard. Just try to avoid using that port in the future.
  3. Picture 3 of How to Format a Pendrive if Windows is Unable
    Plug the drive into another computer. If the drive still does not appear when plugged into another computer, there's a good chance that the drive is dead. You may need to replace it.
    1. If the drive appears when plugged into another computer, there may be an issue with the drivers on your computer. See the next section for instructions on dealing with driver issues.
Part 2 of 4:

Deleting and Reinstalling the Drivers

  1. Picture 4 of How to Format a Pendrive if Windows is Unable
    Press .the Windows key + R and type devmgmt.msc. This will open the Device Manager.
  2. Picture 5 of How to Format a Pendrive if Windows is Unable
    Expand the "Disk drives" category. This will list all of your connected disk drives, including hard drives and USB drives.
  3. Picture 6 of How to Format a Pendrive if Windows is Unable
    Right-click on the USB drive and select "Uninstall". This will remove the drivers for the USB drive from your system.
  4. Picture 7 of How to Format a Pendrive if Windows is Unable
    Unplug the USB drive and then plug it back in. Windows will attempt to automatically install the drivers.
  5. Picture 8 of How to Format a Pendrive if Windows is Unable
    Update your USB drives. If you see a yellow exclamation icon next to any of your devices, it means there is a problem with the drivers. If this yellow exclamation mark is on your Universal Serial Bus controllers, your computer's USB drivers are acting up.
    1. Right-click on the non-working device and select "Update Driver Software". Follow the prompts to reinstall the drivers.[1]
Part 3 of 4:

Formatting the Drive Using Disk Management

  1. Picture 9 of How to Format a Pendrive if Windows is Unable
    Press .the Windows key + R and type diskmgmt.msc. This will launch the Disk Management Utility.
  2. Picture 10 of How to Format a Pendrive if Windows is Unable
    Right-click on the partition for your USB drive. You will be able to see all of the partitions for each drive in the bottom frame of Disk Management.
  3. Picture 11 of How to Format a Pendrive if Windows is Unable
    Select "Format" from the menu. This will open the Format tool.
  4. Picture 12 of How to Format a Pendrive if Windows is Unable
    Select "FAT32" as the file system. This will allow the USB drive to be read by the most devices possible, including Windows, OS X, Linux, and most game consoles.
  5. Picture 13 of How to Format a Pendrive if Windows is Unable
    Uncheck "Perform a quick format". The formatting process will take longer, but Windows may be able to correct errors on the drive.
  6. Picture 14 of How to Format a Pendrive if Windows is Unable
    Click .OK to start formatting the drive. This may take a while, but if the format is successful, the drive should appear in Windows. If the format process doesn't work, try the next section.
    1. Formatting will delete all of the data on the USB drive.
Part 4 of 4:

Formatting the Drive Using the Command Prompt

  1. Picture 15 of How to Format a Pendrive if Windows is Unable
    Open the Command Prompt. You can start the Command Prompt from the Start menu, or by pressing the Windows key + R and typing cmd.
  2. Picture 16 of How to Format a Pendrive if Windows is Unable
    Type .diskpart and press Enter. You may be prompted for administrator access. The prompt will change to DISKPART>.
  3. Picture 17 of How to Format a Pendrive if Windows is Unable
    Type .list disk and press Enter. This will list all of your connected disks.
  4. Picture 18 of How to Format a Pendrive if Windows is Unable
    Type .select disk # and press Enter. Replace # with the number associated with your USB drive.
  5. Picture 19 of How to Format a Pendrive if Windows is Unable
    Type .clean and press Enter. This will check the disk for errors.
  6. Picture 20 of How to Format a Pendrive if Windows is Unable
    Type .create partition primary and press Enter. This will create a new partition on the disk.
  7. Picture 21 of How to Format a Pendrive if Windows is Unable
    Type .active and press Enter. this will make the newly-created partition the active partition on the USB drive.
  8. Picture 22 of How to Format a Pendrive if Windows is Unable
    Type .format fs=fat32 and press Enter. This will format the new partition using the FAT32 file system, which is compatible with most devices and computers.
    1. The format process will likely take a while to finish.
  9. Picture 23 of How to Format a Pendrive if Windows is Unable
    Type .exit and press Enter. This will close the DISKPART utility.[2]
    1. If your USB drive will still not show up in Windows after using the DISKPART utility, or you receive errors when trying to format, your USB drive is most likely damaged and no longer functional.
Update 05 March 2020
driveusbpresstype

You should read it

Maybe you are interested

Category

System

Mac OS X

Hardware

Game

Tech info

Technology

Science

Life

Application

Electric

Program

Mobile