3 ways to clean the Lightning charging port help iPhone charge faster

For iPhone users and devices that use Lightning port as today, in addition to preserving cables, tubers charging, cleaning the charging port is also something to do regularly. Because, using the phone for a long time, the dirt will accumulate and stick to the inside of the Lightning port of the device, which may cause your iPhone to be inefficiently charged or even not accept charging.

Therefore, you need to know how to clean the iPhone charging hole to avoid these problems. Some materials available in the family such as small tips, stick sticks, cotton swabs or compressed air bottles, alcohol, . will be effective assistants to help you. And below, Network Administrator will guide you 3 ways to clean the Lightning charging port to help iPhone charge faster.

1. The 3 steps to protect the phone charging cable are not damaged
2. Experience cleaning mobile phones
3. Instructions on how to wrap beautiful headphones without getting tangled

1. Clean the iPhone charging port with a sharp object

Before performing the cleaning of iPhone charging plugs, you should backup all the data in the device or be more careful to copy the computer, drive, USB. After that, turn off the device and use a small tip (or needle, sim stick, paper pin) to clean the charging port inside gently.

A little note to you, should gently manipulate to avoid breaking off the contact circuits inside the charging port pins of the machine.

2. Use alcohol and Lightning charging port swab

When suddenly feeling that the iPhone I use has a slow charging speed, it is likely that the fabric crumbs (due to being placed in my pocket, shirt) accidentally entered the Lightning connection port. Simply use 70 degree alcohol and a small size cotton swab. Specifically, you need to clean them by taking the cotton swabs into the small tips or stick sticks, dipping them through alcohol and then putting them into the charging hole to clean the inside gently to remove stains and harmful bacteria.

Although microfiber fabrics are very good, cotton swabs are more suitable to remove dirt and dust from hard-to-reach areas on the phone, such as the corners of the phone case, connection ports, etc.

3. Use a compressed air tank to clean the iPhone charging hole

If the machine is still charging slowly or is inaccessible, try cleaning it with a compressed air tank. Just spray into the charging hole, dust and dirt will easily be blown away, both safe and fast to the device right?

So is it, you try the way to clean the iPhone charger plug is very simple that we have just instructed above, then plug in the battery and see the results of the device has been charging faster yet. If not for reasons of slow charging, you also need to clean this charging port periodically to make it more durable.

Good luck!

See more:

1. Mistakes when charging your battery will accidentally "ruin" your iPhone
2. 11 acceleration tips for iPhone and iPad for a long time
3. How to identify the most accurate and fake iPhone headphones