Regular juicer or slow press are easier to clean

One of the most popular criteria when choosing to buy a juicer is easy cleaning of the machine?That saves a lot of time and effort of users.Let's find the easy-to-clean fruit juicer with quantrimang!

Which type of normal juicer and slow press is easier to clean?

There have been many articles comparing between two types of normal fruit presses and slow presses, but mainly assessing the quality of juices as well as the durability of the machine.This article will only mention which machines are easy to clean and disassemble.Let's see it!

The juicer is often difficult to clean and easy to remove

The reason why conventional fruit presses take longer to clean is because of the structure and pressing technology it uses.The machine includes a grinding wheel and a centrifugal pressure with a sharp cutting knife system.This can make the pressing process faster, but it makes it difficult to clean the machine.Because not only cleaning all parts, nooks and crannies, but details of cutting blades and filter net need to be cleaned longer and meticulously, otherwise it will be very easy to cause damage to users.Moreover, most of the current fruit presses are designed with large sizes.This is also one of the reasons that makes cleaning machines difficult and takes longer.

While cleaning the machine takes a lot of time, the juicer often has a pull-back advantage that can be easily and quickly assembled, even when used. Firstly.So, don't be afraid to clean the normal juicer, instead, you can easily disassemble the machine, this is also the detail that contributes to shortening the process of birth!

Slow presses are easy to clean, easy to remove

Compared to conventional fruit presses, slow presses have a special advantage that is easy to clean and wash.Because the machine does not use any centrifugal pressure or a knife-cutting system, only use the screw with the deceleration motor to squeeze the fruit.Therefore, when cleaning, you just need to scrub the parts with warm water without causing much time.

However, in contrast to conventional juicer, the process of removing slow presses is generally not easy.Most types of slow presses include many parts, parts.Therefore, the removal requires meticulous and more difficult.

Basic summary of steps to clean the juicer

Step 1: Turn off the device, unplug it from the power source and wait for the filter to stop rotating completely.

Step 2: Remove dirty parts from the motor part of the machine.Note, when disassembling, it is recommended to remove the sequence from the fruit pulp compartment - the fiber storage container - the safety lock pin - remove the lid of the machine - the filter net - grind the funnel one after another out of the body.

Step 3: Wash these parts with warm water and warm water.After that, you take a pot of hot water with soap and soak the parts of the machine in it.

Step 4: After soaking with soap, use a sponge brush to scrub the parts of the machine.

Note, for areas that are too small to be brushed, such as a nozzle to squeeze out juice, use a small brush to scrub.

Step 5: Wash the filter net and the mill knife with a brush to help clean every corner of the blade as well as the edges of the sieve, which are safe for your hands.

Some small notes when cleaning the juicer

No matter what type of machine you choose, it is easy to clean, but it will depend on how you clean the equipment.Here are some small notes when cleaning the juicer, you need to remember.

1. Use a mild detergent to clean the machine.Do not use any strong cleaners and abrasives because they will damage machine parts and are not good for health.

1. Wash and carefully clean the parts, absolutely no longer clinging to any soap or juice.
2. Do not allow water to stick to the body during cleaning.Because the camera body contains motors and other microchip parts.If water hits, it will be damaged.
3. Care should be taken when cleaning the blades and filters because they are quite sharp.
4. If you use it many times a day, you can just soak it in warm water right after the previous use and rinse it with clean water, No need to clean too many times.

Conclude

If you want to choose an easy-to-clean, time-saving juicer, a slow press is an ideal choice.However, that does not mean that it is impossible to choose a normal fruit juicer, because it is quite simple to remove the device.Moreover, at present, fruit juice products are often improved with more compact designs, less bulky, thus significantly reducing cleaning time.In particular, the price is quite cheap.Therefore, if 'pocket money' is limited, you can choose this model.It just doesn't matter if you lose your toilet.

However, the decision to choose which model is still in you.We just make it easier for you to choose.Hopefully, this information will help you to choose the type of juicer that is most satisfactory, easy to clean for yourself!

>>> Reference: Advice on selecting industrial juicer for restaurants and shops