HomeTechnologyLinux

How to Install Solus

Solus is a Unix-like, independent distribution of Linux using the home-grown Budgie desktop environment, designed for modern personal computing devices. Unlike many Linux distributions, Solus was built from the ground up.https://distrowa...
Part 1 of 3:

Preparing

  1. How to Install Solus Picture 1How to Install Solus Picture 1
    Ensure that your computer meets the minimal requirements. Though Linux distributions are well known for being flexible, it's always a good idea to check and see if your computer meets the system requirements before installing a new operating system.
    1. Your computer must have either a DVD drive or USB port.
      1. If you intend on using a USB drive as explained in this article, it must have at least 2GB of space to hold the installer.
    2. You'll need at least 10GB of space on your computer.
    3. 2GB of RAM is necessary for a smooth experience using the OS.
    4. Finally, your computer must use a 64bit processor.
  2. How to Install Solus Picture 2How to Install Solus Picture 2
    Back up all of your data. Never underestimate the importance of backing up your data before installing a new OS. If you're not planning on installing Solus along the side of your current operating system, recognize that all of the information you have stored on your hard drive will be erased. Even if you are going to dual boot your current OS with Solus, data loss is still possible.
    1. Most operating systems come with software used to back up your information preinstalled. Try reading How to Back up a Computer for instructions on your device.
  3. How to Install Solus Picture 3How to Install Solus Picture 3
    Get the installation medium. The installation medium is the device that you're going to load the installer onto. You can use either a CD or USB drive. As mentioned before, your USB must have at least 2GB of space if that's what you intend on using to install Solus.
  4. How to Install Solus Picture 4How to Install Solus Picture 4
    Retrieve the USB writing software. There's a variety of tools you can use to write the ISO file to a USB.
    1. For Linux users, it's recommended that you use Gnome Multi-Writer to write the ISO file to a USB thumb drive, while Windows users should use Rufus.
    2. Although UNetbootin is a popular choice when it comes to writing an ISO file to a USB stick, UNetbootin will not work for this installation[2].
Part 2 of 3:

Creating the LiveUSB

  1. How to Install Solus Picture 5How to Install Solus Picture 5
    Download the ISO file from the download page on the Solus website. Here you will be presented with two options: Solus and Solus MATE. The difference is that Solus MATE uses the MATE desktop environment instead of Budgie. If you're trying to run Solus on older hardware or simply prefer the traditional desktop environment that MATE provides, choose the second option.
    1. Below the screenshot and headline, you will find a list of cities from where you can download the disk image. Choose the one that's closest to your location.
    2. If you have a BitTorrent client, then you also have the option to download the file over a Torrent. This would speed up the download if you have a slower connection.
  2. How to Install Solus Picture 6How to Install Solus Picture 6
    Prepare your USB thumb drive. Take the USB drive that you retrieved in the first part. You should plug it into your computer. All of the information on it will be erased, so take this opportunity to back up any important files it may hold.
  3. How to Install Solus Picture 7How to Install Solus Picture 7
    Launch the USB writing software.
    1. For Windows users, click on the Start button or press the Windows key to open the Start menu. Once the menu is open, type in "Rufus". Assuming you downloaded it properly, it should show up in the results list. Click on the application to open it up.
    2. Ubuntu users can press the super key to open up the Dash. With the dash open, search for "Gnome MultiWrite" and launch the application when it shows up.
  4. How to Install Solus Picture 8How to Install Solus Picture 8
    Write the ISO file to the USB stick. Creating the LiveUSB can and probably will take a long time, especially if you're doing this on older hardware.
    1. When in Rufus, select your USB thumb drive from the Devices drop down list. Next, check the box labeled "Create a bootable disk using", and then select "ISO image" from the adjacent menu. Click on the drive image logo and browse to the location where you saved the Solos ISO file. Finally, Hit start and then confirm to begin creating the LiveUSB.
    2. When in Gnome MultiWriter, Ensure that your USB drive is plugged in and hit "Start copying". Once the file browser pops up, navigate to the location that you saved the Solus ISO file and open it up. The copying will start immediately.
  5. How to Install Solus Picture 9How to Install Solus Picture 9
    Wait for the writing to finish. As mentioned before, writing an ISO file to a USB thumb drive can take some time. Depending on how large the file is and how old your computer is, things can take much longer. Be patient.
Part 3 of 3:

Installing Solus

  1. How to Install Solus Picture 10How to Install Solus Picture 10
    Power down your computer and boot into your USB drive. Once your computer is completely shut off, turn it back on. While the manufacturer's splash screen is being displayed, press the key used to enter the Boot Menu. This key is typically F9, F12, Esc or Del. Here, you can select your USB drive from the list of bootable devices.
    1. If you can't get to the boot menu, then you may need to change the boot order in the BIOS menu.
  2. How to Install Solus Picture 11How to Install Solus Picture 11
    Configure all of the geographical information required. In the first few steps, you will be asked about your location, language, keyboard layout, and time zone. Make these changes based on your information.
  3. How to Install Solus Picture 12How to Install Solus Picture 12
    Choose the install location. In the next step, you're required to select where you want Solus to be installed. Choose your hard drive from the drop-down list and select the fashion in which you want to install it.
  4. How to Install Solus Picture 13How to Install Solus Picture 13
    Give your system a host name. A host name is a unique title used to identify a machine on the network. Your host name can use letters "A" to "Z", 0 to 9 and a hyphen, although it can't start or end with one.
  5. How to Install Solus Picture 14How to Install Solus Picture 14
    Create a user. Once you have set a hostname for your computer, you will be asked to create one or more accounts who will use your computer. Choose a username, real name, and password for the new user.
    1. Optionally, you can also give the new user administrative privileges. Do this by checking the box below the "Confirm password" field.
  6. How to Install Solus Picture 15How to Install Solus Picture 15
    Review your configurations. Finally, you will be presented with a page listing everything you have set up in the installer. Review this list to avoid doing anything unintentional. Once you have done this, press the button labeled "Install" at the bottom of the window.
  7. How to Install Solus Picture 16How to Install Solus Picture 16
    Wait for the installation to complete. The installation will now begin. Depending on how fast your computer is, this may be a quick process or it might take slightly longer. The installation progress will be displayed at the bottom of the screen.
  8. How to Install Solus Picture 17How to Install Solus Picture 17
    Reboot your PC. As the very last step, you will be required to restart your computer before you can use your new Solus installation. Power off your computer and remove the installation medium before turning it back on. Once your computer boots up, you will find yourself in the Budgie desktop environment.
4 ★ | 3 Vote
usbcomputerdrivesolus

You should read it

Maybe you are interested

Linux