Top best water booster pump for family

Water pump is an indispensable device in the family, helps to supply water for domestic use with devices such as washing machines, hot water bottles . Products that are widely used are water pumps increased Pressure, however, to choose the right type of booster pump, you should consult the article below.

What is a booster pump?

Booster pump is a series of water pumps that are used to increase water pressure, making the water flowing out of the nozzle more powerful, than when not using a pump.

Some key features of booster pumps:

1. Used to increase pipe pressure
2. All booster pumps are automatic
3. There are 2 types of booster pump: normal booster (mechanical): use relay to disconnect power; Electronic turbocharger: use electronic circuit to disconnect power.

Booster pumps are often installed on high, under water tanks to push water down the pipes because of the ability to push up high.

The machine automatically increases the pressure in the pipe, makes the water stronger, can be used for solar water heater (using stainless steel pressure bulb).

So, booster pump is an automatic pump, used to increase pipe pressure when any 1 valve in the pipe is opened. Suitable for families with weak waterways.

Some of the most quality turbochargers available today:

1. Panasonic A130JAK booster water pump (125W)

Advantages:

Suitable for buildings of 1-3 storeys

Automatically increase water pressure

Compact design does not take up much installation area

Specifications:

1. Throat suction discharge: 25mm
2. Off / off pressure switch: 1.1 kgf / cm3 - 1.8kgf / cm3
3. Pump type: Booster water pump
4. Voltage source: 220V / 50Hz
5. Capacity: 125W
6. Water flow: 32 liters / minute
7. Depth: 9m
8. Push height: 10m

2. Panasonic A-200JAK booster water pump

Advantages:

Capable of drawing water directly from water supply pipes to increase pressure on household appliances such as washing machines, showers, water heaters .

It has the function of automatically increasing the water pressure when pumping out to help the water flow faster and faster.

Quiet operation, low noise with 200W power and 1-phase induction.

Automatic switch is integrated in the water pump

Specifications:

1. Pressure switch on / off: 1.1 - 1.8 kgf / cm3
2. Rotation speed: 2,850 rpm
3. Voltage source: 220V / 50Hz
4. Capacity: 200W
5. Water flow: 45 liters / minute
6. Depth: 9m
7. Push height: 10m
8. Suction diameter: 25mm

3. Panasonic A-130 Jack automatic booster pump

Advantages:

1. Has strong water absorption capacity to load with high pressure on buildings, or used for car wash pump
2. Special construction with cast aluminum motor body, in which the wing is made of copper
3. The automatic toggle switch is integrated inside the fire protection material
4. Built-in thermal relay, it automatically turns off when the temperature rises too hot

Specifications:

1. Pressure: Pressure on the power (1.1 kgf / cm2); Power off pressure (1.8 kgf / cm2)
2. Pump type: Booster water pump
3. Voltage source: 220V
4. Capacity: 125W
5. Water flow: 1.92 m3 / h

The above is information about booster pumps, hopefully through this article, you will choose the type of booster pump suitable for your family.

Thank you for following the article