Instructions on how to choose to buy and install mini booster pump for washing machine

In many cases, we must use the mini booster pump for the washing machine so that the washing process goes smoothly.

With the ability to increase water pressure, booster pumps are used to support operations for many devices, especially washing machines. Today TipsMake.com will show you how to choose to buy and install a mini booster pump for your washing machine in a simple and straightforward way!

content

  1. When to use mini booster pump for washing machine?
  2. Things to note when choosing to buy mini booster pump for washing machine
  3. Instructions on how to install mini booster pump for washing machine

When to use mini booster pump for washing machine?

The weak inflow of water will interfere with the operation of the washing machine. There are many reasons for this situation, most notably the following cases:

Due to the installation position of the washing machine

If technically correct, we must install a washing machine at a position that is at least 1 meter lower than the water tank. However, due to a number of reasons such as lack of space, many families have installed washing machines and water tanks in equal positions or washing machines higher than water tanks. This will result in reduced water pressure leading to a very weak flow of water into the washing machine. In addition, installing a washing machine in an area with an unstable water source may also affect the water flow intensity.

Some other causes

  1. The water flow is hampered by the inlet filter containing many deposits
  2. The water tank does not have enough water
  3. The washing machine's water supply valve is stuck
  4. The washing machine board has an error

For reasons that come from inside the washing machine and water tank like there is not enough water, sieve mesh with sludge, faulty circuit board, . you will have to overcome by repairing, cleaning or adding water if needed. In case of weak water flow due to the location of the washing machine, if it is not possible to change the position, it is best to use the appropriate mini booster pump.

Instructions on how to choose to buy and install mini booster pump for washing machine Picture 1Instructions on how to choose to buy and install mini booster pump for washing machine Picture 1

The weak inflow of water affects the operation of the washing machine

Things to note when choosing to buy mini booster pump for washing machine

To choose a mini booster pump for a suitable washing machine, you need to keep in mind the following points:

  1. Parameters to determine: Area and space for installation of pumps, distance and height between water tanks, volume of each tank, distance between washing machine and water tank. These numbers will help you choose the pump with the right capacity and pressure.
  2. Should choose mini booster pump for washing machine with low noise so as not to affect the whole family's activities.
  3. The pump pressure is moderate, not too large to avoid damaging the washing machine.
  4. If installed exclusively for washing machines, it is recommended to select products with a capacity of 60W - 125W.

Instructions on how to choose to buy and install mini booster pump for washing machine Picture 2Instructions on how to choose to buy and install mini booster pump for washing machine Picture 2

Choose a mini booster pump for the right washing machine

Instructions on how to install mini booster pump for washing machine

How to install mini booster pump for washing machine is quite simple. Follow our instructions:

Step 1 : Locate the installation of booster pump. You should choose safe, flat locations to avoid the case of shaking and falling when operating. In particular, the pump should be positioned with the water source to increase efficiency.

Step 2 : Install the water pipe into the machine.

Note:

  1. Install the ruble on the front end of the tube
  2. Select the diameter of the pipe to match the hole diameter
  3. The pipe should be placed in a safe position and should be assembled in a straight line, limiting. The more folded pipes will reduce the efficiency of booster pumps.

Step 3 : Check carefully the connection locations to see if there is water leakage. If you have a leak, you should replace it with a new tube or wrap a tan bandage to fix it.

Instructions on how to choose to buy and install mini booster pump for washing machine Picture 3Instructions on how to choose to buy and install mini booster pump for washing machine Picture 3

Install mini booster pump for washing machine

Hopefully our sharing will help you choose and install mini booster pump for successful washing machines . Please visit META.vn for advice and order quality and low pressure booster pumps.

>>> More references:

  1. What is a booster pump? Buy the best one today?
  2. What is a booster pump used for? Classification of booster water pumps
  3. How to install booster pump for water heater
5 ★ | 1 Vote