Three steps to clean the indoor air conditioner at home effectively

The air conditioner suddenly doesn't cool or the cold air is weak, maybe because the indoor unit regulates your house too much dust but not cleaned. Normally, we should periodically clean the indoor unit and clean the air conditioner outdoor unit to ensure the stable operation of the machine.

In some people's opinion, cleaning electronic equipment is a complicated and difficult job and can cause damage. However, the fact that air conditioner is hygienic is a very simple job that you can solve by yourself with only 3 extremely simple steps, without the cost of calling a mechanic.

1. Does air conditioner running well need maintenance?
2. Instructions for cleaning the air conditioner properly
3. Should the outdoor unit be installed outside?

Instructions on how to clean the air conditioner unit properly

Cleaning the filter net of conditioning is not enough, because part of the dust and bacteria still accumulate inside parts such as radiators. Therefore, the cleaning of the filter element is only part of the "cooling" process for air conditioning. To fully clean the indoor unit, you need to follow the three steps of cleaning the cabinet, cleaning the filter and finally disinfecting the heat sink.

Step 1: Clean the air conditioner cover

First of all, you have to turn off the air conditioner and then use a damp cloth to wipe away the dirt from the device directly. While cleaning, move the towel in the same direction, rub on the surface from left to right to the edge, then fold the rag, change to the clean side and wipe again. If you have time, you can also do this several times to make the device look as good as new.

Step 2: Reproduce the filter element

To clean the air filter element, you must open its front. On most devices, the front panel or plastic panel on the front can be easily opened by lightly tapping the edge or edges of the case. After removing the sieves, you wash them directly with clean water. You can use a toothbrush to clean and remember to allow them to dry naturally, absolutely not to use a dryer because it can cause damage to the sieve.

Step 3: Sanitize and disinfect the fins

Since it is a non-removable part, if you use a towel, brush, . will not be able to achieve the desired effect, may even damage the internal parts of the device. The optimal solution when cleaning and disinfecting the radiator parts is to use the air conditioner to spray the spray bottle.

These toilet sprays are sold quite popular in the market with relatively cheap prices. You just need to hold the spray bottle 5 to 10 cm away from the area you want to clean, then spray it evenly over the entire surface. Allow them to stand for 10 - 15 minutes, then install the dry filter net and the air conditioner front cover in the old position. Finally, turn on cooling and cooling mode, adjust the capacity to the maximum. After running for about half an hour, you will see waste water and dirt coming out of the exhaust pipe.

See more:

1. Air conditioner control application on iPhone
2. Top 4 air conditioners with Wi-Fi, remote control with smartphones
3. 4 ways to turn on the air conditioner before going home