Instructions on how to make reindeer and wooden gifts

Counting down the time is only a few days until Christmas. You are wondering what gifts to make for friends and relatives . A wooden reindeer is probably the most meaningful gift for friends and relatives during Christmas. The article below The network administrator will guide you through the steps to make a wooden reindeer.

Raw materials and steps are extremely simple. So you can do it yourself for your friends and relatives during Christmas!

1. Prepare

1. Bulo wood (birch wood) has a diameter of about 1-2 inches (about 3-5 cm). However, there is no birch wood in Vietnam, so you can replace it with any other wood.

1. Hand saw

1. Highlighter

1. Drilling machine (with different drill bit sizes)

1. The branches are small and straight

1. Glue

1. Hammer

1. Cut flowers . and some other tools.

You can refer to more:

1. 14 simple steps to create a snow effect for the photo
2. 5 steps to create a Christmas card in a personal style
3. How to create snowflakes in Photoshop

2. Steps to take

Step 1: Cut a piece of wood as a reindeer body

Depending on whether you want to be a big or small reindeer. Use a hand saw to cut a piece of wood to make a reindeer body.

Step 2: Cut a piece of wood to make reindeer

Your reindeer head saws as shown above.

Step 3: Cut a piece of wood to make reindeer ears

Step 4: Use brush to mark the drill holes

Use markers to mark drilling positions to attach the legs, head . reindeer.

Then use the drill to drill the positions you marked. The size of the big or small drill depends on the size of the branches you have chosen. Tree branches for legs, reindeer horns are not necessarily birch, as long as the branches are straight and suitable.

Note not to drill out the wooden stick but only drill to 1/2 the wooden stick.

Drill a hole in the back to attach the reindeer's tail. Note, the hole size is similar to the bore hole size with reindeer legs.

Drill a small hole in the face on the wooden stick you choose to make the reindeer body to attach the reindeer neck.

Note: For the hole in the neck you should use a small drill and choose a small, thin branch to attach the reindeer neck to be more beautiful.

Step 5: Attach the reindeer legs and tail

Use 4 small branches to attach to the holes to make reindeer legs. Then use glue to attach the legs that do not fall off.

Use flower scissors to cut small branches attached to the legs for equal.

Attach a small branch to the bore hole of the reindeer tail as shown above, then use glue to secure it.

Step 6: Drill holes in the wood to make reindeer

On the wood you use to make the reindeer head, use a marker and drill 2 small holes to attach the reindeer horn and a drill hole at the bottom to make the reindeer neck.

For the reindeer horn section, you can choose 2 small, thin branches with branches above.

Note: borehole size to make reindeer neck is similar to borehole size on the body.

Step 7: Attach the eyes and reindeer nose

Use hammer to attach 2 thumbtacks for 2 eyes for reindeer.

At the bottom use a hammer to attach another thumbtack to make the nose.

Step 8: Append the reindeer horn section

Use 2 small branches with branches above to attach to the 2 bore holes you mark to attach the horn. Use glue, attach the back part so that 2 horns do not fall off.

Step 9: Attach the reindeer ear

For the ears, use glue to paste the two halves of the circle on the back of the reindeer's head as shown.

Step 10: Attach the head to the reindeer body

Proceed to attach the body part to complete a reindeer.

After completing your reindeer uncle will look like this:

Wish you success and have a warm, warm Christmas season with your loved ones!