How to Fix Corrupted Hard Drive with 4DDiG

Using the hard drive to store and retrieve data regularly for a long time can cause the hard drive to corrupted or fail at any time. Therefore, in order to avoid data loss due to computer corrupted hard drive, the following article TipsMake will explain to you the causes and how to fix common corrupted hard drive.

Picture 1 of How to Fix Corrupted Hard Drive with 4DDiG

Signs of a corrupted hard drive

When a computer has a hard drive corrupted, there are not always obvious signs. Please pay attention during use, if you encounter the following symptoms, your hard drive may be faulty!

1. The computer runs slowly or crashes frequently.
2. A blue screen appears.
3. The computer reports a 'Corrupted' error when outputting data.
4. After saving the data, it disappeared.
5. The computer makes strange noises like hissing, jamming, coming from the location of the hard drive.

Why does the corrupted hard drive?

There are thousands of reasons for your hard drive to fail. From causes such as malfunction of other components, especially RAM memory, poor quality software, Viruses, improper shutdown . or the failure of the hard disk's own engine can be the cause. cause your hard drive to corrupted, causing you to lose data.

Summary of common hard drive errors, can be divided into 2 types of hard drive errors as follows:

1. Hardware corrupted, physical error

1. Firmware error from the manufacturer. If you buy a new computer or hard drive and the drive does not work properly, just a few days later, an error appears, it is highly likely that the cause is from the manufacturer. It is possible that the hard drive when delivered to the customer was not censored.
2. Too hot. The temperature that the hard drive can work well is from 20-25 degrees Celsius. When the hard drive temperature exceeds this level, it will cause the oscillator crystal clock to change frequently. It also causes damage to internal hardware. Therefore, the best way to ensure that the hard drive is not bad is to keep the hard drive away from heat sources and use a fan or effective cooling methods.
3. Degenerated. All products have a certain lifespan and so do hard drives. During use, it is obvious that the hard drive will appear an error and most likely the hard drive has a bad bad sector.
4. Static electricity. Not only other computer components but even hard drives can be damaged by static electricity.
5. Electricity supply. Unstable power supply or the inability to provide the corresponding power to the device or the power supply being too high or too low is also the cause of a bad hard drive.
6. Dust. Infrequent cleaning of computers and hard drives can leave layers of dust on computer components. Dust is the biggest cause of bad hard drives. Just dust falling on the surface of the disk will cause the hard drive to have bad sectors. In addition, the thick layer of dust that accumulates inside the circuit can also damage the heatsink.
7. Hard drive is shocked. Most manufacturers equip hard drives with shock protection. However, the fact that you shake it back and forth or vibrate, repeated strong collisions for a long time will still cause direct damage to the hard drive.
8. Due to a physical error. In order for a hard drive to be able to read and write data, it needs moving parts. However, this part can gradually wear out, degrade after a period of use and eventually lead to physical damage in the hard drive.

2. Soft error, error caused by use

1. File system error. One of the very common causes of a bad hard drive is a file system error. When the file system is compromised, it causes logical errors. From these errors can lead to bad sectors on the hard drive.
2. Error due to Virus / Malware attack. When using a computer, the biggest headache for users is the attack of viruses and malware. Anyone wants to avoid this attack because it can make the hard drive vulnerable very quickly.
3. Improper shutdown. When the computer is working, the hard drive must also operate at a very high speed and the drive head remains in different positions on the disk to perform the task of reading data. Therefore, if you turn off the computer suddenly, the drive will be forced to stop in place. This process can cause the head drive to rub, causing direct bad sectors.
4. Due to humans. Humans are also a cause of bad hard drives. Human mistakes can cause serious damage to systems and hard drives. For example, modifying system registry settings, installing the wrong operating system, etc. These errors are often difficult to correct and data recovery is also very complicated.

Methods to fix a damaged hard drive?

When you have hard drive related problems, the first thing to do is to determine which case your hard drive is having problems with, be it a hardware failure or a soft error. Most hard drive hardware failures can't be fixed at home! You must hire a professional to repair the physical failure of the hard drive, or have to replace the hard drive with a new one. Therefore, the first thing when you want to fix a faulty hard drive is to rule out all cases of hardware failure and physical failure. You need to do the following steps:

1. Step 1. Power off the computer
2. Step 2. Clean the computer, clean the hard drive.
3. Step 3. Check the external condition of the hard drive.
4. Step 4. Check or replace the data cable connected to the hard drive.
5. Step 5. Check, clean or replace the power cable connected to the hard drive.
6. Step 6. Start the computer, access the BIOS to check if the computer can access the hard drive or not.

If the computer can't find the hard drive, then your hard drive has a hardware failure and you can't repair it yourself at home. You have to call the hard drive repair experts, or it's time to replace the hard drive with a new one.

If your computer finds your hard drive and displays your hard drive information in the BIOS, chances are your hard drive just has a soft failure. The table can completely fix these soft errors at home.

To fix soft errors on the corrupted hard drive, it is imperative to use a hard drive data recovery and repair software. There are many hard drive repair software on the market. Prominent among them is Tenorshare's 4DDiG software. 

Tenorshare 4DDiG is a data recovery software solution that provides users with powerful information protection measures. The program saves files that are accidentally deleted, corrupted or lost due to viruses. The product also recovers files from partitions and removable storage devices, such as external drives and USB sticks. It also saves time by giving you a preview of recoverable media before performing a permanent restore operation. Tenorshare 4DDiG is available to install on Windows and Mac machines.

Features of Tenorshare 4DDiG

1. Corrupted Files: Tenorshare 4DDiG retrieves compromised data such as virus-infested files, corrupted documents, and information accidentally deleted from your empty recycle bin.
2. Dynamic Device Recovery: The program can rescue data from a variety of devices and platforms, including laptops, computers, formatted storage media, and external media, such as USB drives and CDs/ DVD. It also allows a deep scan of all partitions so you can be sure you don't miss any important information.
3. Media Recovery: This product is equipped with tools to help users recover audio, photo and video files from damaged storage media. It can even pull photos and videos directly from most digital cameras, allowing you to get media files back directly from the source. If those files are corrupted or damaged, the software can repair and restore the photo and video files.
4. Diverse File Formats: The software helps users to recover a variety of files, including office documents, RAR/ZIP compressed files, and system files like NTFS and FAT.
5. Preview Recoverable Files: The app lets you preview recoverable files before you commit to a lengthy, lengthy recovery scan. The vendor boasts that all files are recoverable, even those that have been permanently deleted, as long as they haven't been overwritten by newer data.

How to fix Corrupted hard drive, recover data with 4DDiG

Tenorshare 4DDiG allows you to get back any deleted, formatted or lost data from your computer or memory card easily. Retrieve your lost data from common locations like Desktop, Recycle Bin and Selected Folders as well as Devices and Drives in different scenarios like accidental deletion, empty recycle bin, system crashed. bugs, malware infections, and more. You follow the steps below to fix corrupted hard drive and recover data with 4DDiG software.

Step 1: Download the 4DDiG software from the link below and install it on your computer

Step 2: After installing and launching Tenorshare 4DDiG, you will arrive at the main interface below, showing locations like Devices and drives and general location. In our case, select the local disk where you lost your data from the list of hard drives and then click Start to continue.

Picture 2 of How to Fix Corrupted Hard Drive with 4DDiG

Step 3: 4DDiG immediately scans your entire selected hard drive to find lost data. It lists scanned items based on Tree View and File View as 4DDiG keeps looking for deleted files in the drive. There is a progress bar showing the level of completion. In addition, you can pause or stop the scan at any time as long as you have found your desired files to retrieve.

Picture 3 of How to Fix Corrupted Hard Drive with 4DDiG

Next, you can view the scan results, showing how many files were found successfully. If you can't find the lost data you want, you can click Deep Scan at the bottom of the interface to recover deleted files, which can take a long time.

Picture 4 of How to Fix Corrupted Hard Drive with 4DDiG

Step 3: Preview and restore files. 4DDiG supports previewing and recovering different types of files like photos, videos, audios, documents and more. You can select your desired files based on the category, preview them to get detailed information and then click Recover to recover them from your hard drive.

After you click Recover, a dialog box will open, asking for the location where you want to restore the file. Select the desired but different location and click OK . 

Picture 5 of How to Fix Corrupted Hard Drive with 4DDiG

Congratulations! Files that were accidentally deleted from your local disk have been recovered and you can view them now. 

Please do not save to the same partition where you lost them in case the disk is overwritten and the data is lost forever.

You can see detailed how-to videos below.

Advantages of Tenorshare 4DDiG software

1. Ease of use: 4DDiG is very intuitive and easy to use.
2. Diverse recovery modes: 4DDiG app comes with loads of recovery modes so they can rescue lost data in almost any situation.
3. Quick recovery: 4DDiG can quickly recover lost files.
4. Compatibility: Some people like how well the program works with other Tenorshare software solutions.
5. External Drive: 4DDiG can effectively retrieve lost data from external drive.
6. Easy on the system: 4DDiG is easy on their system and they can still use other apps during file recovery without any problem.
7. Deep Scan: Many users appreciate 4DDiG's deep scan capabilities as they can rescue files from every corner of their system.
8. File Recovery: Many people have agreed that the 4DDiG program can recover nearly any type of lost file from their system.

Conclude

The above article TipsMake has explained to you the causes and how to fix common hard drive errors, and introduced you to the famous Tenorshare 4DDiG hard drive repair and data recovery software. This is a reliable software and is used by many data recovery experts. Hope this information is useful to you.

Good luck

Jessica Tanner

Update 27 April 2021