How to remove the simplest anti-theft clothes at home

Today, most of the fashion stores, supermarkets have anti-theft chips on clothes to prevent frauds from taking advantage of, stealing products. After payment, you will be removed by the cashier with the chip removal machine attached under the cashier table. The machine that removes the chip from the clothes is thanks to the magnet inside. Magnets will attract iron nails so you can easily pull out of clothes. However, there are times when negligent employees forget to remove chips on your clothes. When I came home, it was too late, at this point, how could I remove this chip from my clothes so that my clothes would not be torn and not known to steal the product?

If you are in this situation, don't worry Network administrators will help you with this. Hope they will help you. Let's work together.

1. Use rubber band

Step 1 : First, put the cartridge of the anti-theft stamp face up on the table.

Step 2 : You need to pull this anti-theft chip away from your clothes as much as possible.

Step 3 : Use a elastic band, big size belt, firm and long enough, then wrap around the latch of the anti-theft chip.

Step 4 : One hand holds the large part of the cartridge, the other hand uses force to pull the pin out. In this case, if a elastic band is not enough to loosen the chip, you can use more.

2. Use a screwdriver

Step 1 : Put the anti-theft chip firmly on the floor and point the top face up.

Step 2 : Use a very thin screwdriver and place it parallel to the pyramid shaped block.

Step 3 : Press the screwdriver head with the force to penetrate the plastic and slowly push it up.

Step 4 : After the pyramid of the chip has opened, now you just need to remove the metal silver pad underneath.

Step 5 : Now there will be a latch with a snail up, you just need to get it done.

3. Freeze security stamps

If you can not do the above, you give pants, shirt with chips in the freezer to perform the removal of security stamps is also a suggestion for you. Proceed as follows:

Step 1 : Put clothes in the freezer compartment and leave it overnight, for as long as possible.

Step 2 : Now you can use elastic band or hand to remove the security stamp without fear of being stained with ink in the stamp because they are frozen.

4. Using force and ingenuity

Step 1 : Gently pull the security stamp out of the clothes about ten times, until the safety pin is loosened slightly.

Step 2 : Use a large nail. Nails must be larger than security stamps and about one coin wide.

Step 3 : Pull the security stamp away from the clothes. Place the plastic part of the security stamp on the side.

Step 4 : Use a hammer and close the nail to the cartridge until the chip bursts.

Note : When you close you should not use too strong force, this method needs perseverance, you can repeat the action many times until the stamp falls off or the security stamp will break, you will be friends with it for life.

5. Use pointed nose pliers

Step 1 : Put the security stamp so that the cartridge is facing up

Step 2 : Use two pliers to grip the corresponding ends of security stamps

Step 3 : At this time, you bend the two ends of the security stamp on the pliers, note so gently break, avoid breaking the ink stamp on the clothes.

Step 4 : When you bend the security stamp, the pin in the stamp will fall out so you can remove the stamp easily.

6. If light is not optimal, you must apply strong methods

Many modern stamps will have electromagnets instead of cartridges; When you open it, you will find that there is no ink inside.

Step 1 : You need to prepare something to insert in the middle of the security key to create a space for the stamp.

Step 2 : Use the force gently to break the security pin up and down continuously for many times until the latch expands from the card.

Step 3 : Now you can easily remove the latch.

7. Use high temperature

Step 1 : First you need to prepare a lighter and a small piece of paper, then wrap that piece of paper and burn the tip of the stamp.

Step 2 : After you have burned the end of the stamp, you use a sharp knife or something to cut deep into the bottom of the stamp, now you just need to push the nail out of the stamp is finished.

Note:

1. This method is only used when the employee forgets to remove it for you and you cannot return there.
2. The above methods are used for rectangular cards and spiral security latches.

Hope the above article is useful for you in life!