How to remove malicious programs GS.Enabler, SK.Enabler, SK.Enhancer, WS.Enabler?
Programs like GS.Enabler (GS.Enabler.exe), SK.Enabler (SK.Enabler.exe), SK.Enhancer (SK.Enhancer.exe) and WS.Enabler (WS.Enabler.exe) of the manufacturer PremiumSoft is considered as unwanted programs (potentially unwanted programs - PUPs). These programs "hide" on the user's computer and make some changes to the settings, jeopardizing the system.
These unwanted programs - Potentially Unwanted Programs (PUP) can download malware on the system that has been attacked, disable antivirus programs and redirect the browser to the ad pages to make money. Usually PUPs are often included in programs, free software that users download and install from unknown sources.
So how to remove malicious programs GS.Enabler, SK.Enabler, SK.Enhancer, WS.Enabler on your computer, please refer to the following article of Network Administrator.
Step 1: Start the computer in 'Safe Mode with Networking' mode
To start your computer in Safe Mode with Netowrking, follow the steps below:
- On Windows 7, Vista and Windows XP:
1. Close all programs and then restart your computer.
2. Press the F8 key while the computer restarts, before the Apple logo appears.
3. At this time, the menu " Windows Advanced Options Menu " appears, use the arrow keys to select Safe Mode with Networking and press Enter .
- On Windows 8 and 8.1:
1. Press the Windows + R key combination to open the Run command window.
2. On the Run command window, type ' msconfig ' and press Enter .
3. Now on the screen appears the window S ystem Configuration , here you click the Boot tab , then select Safe Boot and Network .
4. Click OK and then restart your computer.
Note:
To restart Windows to normal mode (Normal Mode), you perform the same steps and then remove Safe Boot item is finished.
Step 2: Remove malicious programs and unwanted programs from Control Panel
1. To do this:
- On Windows 8, 7 and Windows Vista: Go to Start => Control Panel .
- On Windows XP: Go to Start => Settings => Control Panel .
- On Windows 8 and 8.1:
Press the Windows + R key combination to open the Run command window.
Next enter Control Panel there and press Enter.
2. On the Control Panel command window:
- On Windows XP: double-click Add or Remove Programs .
- On Windows Vista, 7 and Windows 8: double-click Programs and Features or Uninstall a Program .
3. On the window of the programs displayed:
- Arrange the programs displayed by the installation date (click Installed On).
- On the list of programs, find and remove malicious programs, which include:
- GSEnabler, GS.Enabler, GS-Enabler, GS_Enabler (by 'PremiumSoft')
- SKEnabler, SK.Enabler, SK-Enabler, SK_Enabler (by 'PremiumSoft')
- SKEnhancer, SK.Enhancer, SK-Enhancer, SK_Enhancer (by 'PremiumSoft')
- WSEnabler, WS.Enabler, WS-Enabler, WS_Enabler (by 'PremiumSoft')
- Adobe Updater
- DDoWnloAD kkeaepEr
- dowunLoaditokeeeep
- DoWnloaad keepera
- EZDownloader
- GS.Supporter 1.80
- OptimizerPro
- Optimizer Pro v3.2
- SearchNewTab
- ss_Helper
- ss u Supporter
- surf and keEap
- YoutubeAdblocker
- Also find and remove recently unknown programs installed on your system.
Step 3: Delete folders and malicious files
Note:
You will have to activate hidden files and folders on the system.
Refer to the steps to enable hidden files and folders on Windows 10, 8 and 7 here.
1. Navigate to the following links and proceed with deleting the items:
C: Program FilesGS-Enabler
C: Program FilesEZDownloader
C: Program FilesOptimizer Pro
C: Program FilesSK-Enabler
C: Program FilesSK-Enhancer
C: Program FilesSurFNakeeap
C: Program FilesYoutubeAdblocker
- On Windows XP:
C: Documents and SettingsAll UsersApplication DataQuickset
C: Documents and SettingsAll UsersApplication DataSoftWarehouse
C: Documents and SettingsAll UsersApplication DataStarAppGS-Enabler
- On Windows 8, 7, Vista:
C: UsersAll UsersQuickset
C: UsersAll UsersSoftWarehouse
C: UsersAll UsersStarAppGS-Enabler
C: ProgramDataBetterSoft
C: ProgramDataInstallMate
C: ProgramDataSK-Enabler
C: ProgramDataSoftWarehouse
C: ProgramDataStarAppGS-Enabler
Step 4: Remove settings and folders of adware (Adware) with AdwCleaner
AdwCleaner is a free tool, which you can use to easily remove unwanted adware, programs (PUPs - Potentially Unwanted Programs), Toolbars, attackers. browse (Hijackers), .
1. Download AdwCleaner to your device and install it.
Download AdwCleaner to your device and install it here.
2. Close all the programs you are open, then double-click AdwCleaner to open the program on your computer.
3. Accept the terms and then click the Scan button.
4. After the scan finishes, click Clean to remove all malicious programs and unwanted programs.
5. On the AdwCleaner - Information window, click OK, then click OK again to restart your computer.
6. After the computer has finished booting, close the AdwCleaner "information (readme) window again and follow the steps below.
Step 5: Use the Junkware Removal Tool to remove Junkware files
1. Download the Junkware Removal Tool to your computer and install it.
Download the Junkware Removal Tool to your computer and install it here.
2. After successfully downloading and installing the Junkware Removal Tool, proceed to open the program.
Press any key to start scanning your computer with JRT - Junkware Removal Tool.
3. Wait for JRT to scan and clean your system.
4. Close the JRT log file and restart your computer.
Step 6: Remove malware with Malwarebytes Anti-Malware Free
- Download and install Malwarebytes Anti-Malware Free:
Download Malwarebytes Anti-Malware Premium to your device and install it.
Download Malwarebytes Anti-Malware Premium to your computer and install it here.
To install the free version of the application, uncheck the 'Enable free Trial of Malwarebytes Anti-Malware Premium' option on the final installation screen.
- Scan and clean your computer with Malwarebytes Anti-Malware:
1. Run Malwarebytes Anti-Malware and allow the program to update (update) the latest version (if needed).
2. After the update process finishes, click the Scan Now button to start the scan of your system, remove malware and unwanted programs.
3. Wait until the system scan finishes.
4. When the scan is complete, click Quarantine All to remove the detected threats.
5. After the process has finished, restart your computer to complete the process.
6. After the computer has finished booting, run Malwarebytes' Anti-Malware again to confirm there are no "threats" on your system.
Tip: To make sure your computer is virus-free and safe, perform a full scan of your system with Malwarebytes' Anti-Malware in Safe Mode.
Step 7: Clean up junk items and files
Use CCleaner to clean the system, remove temporary internet files and registry files.
Download CCleaner and install it here.
Step 8: Scan the system again
Restart your computer, then use an antivirus program to scan the system again.
You can refer to some effective antivirus software for Windows computers here.
Step 9: Reset your browser to the default setting state
- On Internet Explorer:
To reset Internet Explorer to the default setting, follow the steps below:
1. Open Internet Explorer, then click the jagged icon in the top right corner of the screen, select Internet Options.
2. Now on the screen of the I Internet Options window, here you click the Advanced tab .
3. Then click Reset .
4. On the ' Reset Internet Explorer settings ' window , select ' Delete personal settings ' then click the Reset button.
5. After the reset process ends, click the Close button to close the confirmation dialog window. Finally restart your Internet Explorer again.
6. Close all Internet Explorer browser windows, then restart the browser.
- On Chrome browser:
1. Click the 3 dash line icon in the top corner of the screen, select Settings.
2. Now on the screen appears the Settings window, here you scroll down to find and click Show advanced settings (show advanced settings).
3. On the screen, an advanced installation window of the Chrome browser will appear, here you scroll down to find Reset browser settings . Next click on Reset browser button.
4. A confirmation window will appear on the screen, your task is to click the Reset button to confirm.
5. Restart your Chrome browser.
- On Firefox browser:
1. Click the 3 dash line icon in the top right corner of the screen, then select Help.
2. On the Help Menu, click Troubleshooting Information .
If you cannot access the Help menu, enter about: support in the address bar to open the Troubleshooting information page.
3. Click the ' Refresh Firefox ' button in the top right corner of the Troubleshooting Information page.
4. Continue to click the Refresh button Firefox on the confirmation window.
5. Firefox will automatically close the window and return to the original default installation state. Once completed, a window displaying the information will appear. Click Finish .
Refer to some of the following articles:
- 9 most effective antivirus software for Windows today
- How to get rid of root virus * .OSIRIS - Ransomware Locky?
- Remove completely navigation Yeabd66. cc in browsers
Good luck!
You should read it
- Rooted MySearch123.com on Chrome, Firefox and Internet Explorer browsers
- What is HulaToo? How to remove HulaToo?
- Instructions for removing PUP.Tuto4PC virus
- Top 5 software to remove the best program on your computer
- Snap.do removal guide on Chrome, Firefox and Internet Explorer
- Remove 'root' programs that haven't been uninstalled completely on Windows 7, XP
- Instructions to remove MyStartSearch on all browsers
- Completely remove URL Mal Virus - http://107.170.47.181
- How to Remove Viruses
- How to remove pixels in GIMP
- Virus 'interyield jmp9' attacks the system, this is the way to get rid of this virus
- How to remove the root virus ExtTag.exe / ExtTags.exe
Maybe you are interested
How to use GS Auto Clicker, automatically click mouse on computer
How to use Auto Clicker Assist to automatically click the mouse
Instructions to fix double click error on computer mouse - Click once becomes twice
PowerToys will soon support creating app spaces and launching with just one click
Turn Windows 11 interface into Windows 10 with just one click
Fix right-click issue on Windows 10