4 amazing tips from a portable drill

The family handheld drill is not the only use for drilling and drilling! This kind of tool also brings many extremely interesting benefits for our daily life. Don't waste the following useful tips when your home has this portable drill!

Making egg whisking tools is just a snap

Step 1: Take a metal hanger and use a pliers to break a small rod.

Step 2: Use the forceps to bend the ends of the iron rod (as shown below).

Step 3: Clamp the iron bar back to the tip of the machine.

And you quickly have an egg whisk that is not inferior to the real egg whisk. The speed of a large drill will help the egg whisking work become faster.

Turn portable drill into floor scrubbing tool

Step 1: Use the old toothbrush to make a very useful scrubber. First, use a drill to screw a hole into the tip of the brush.

Step 2: Remove the rest with the nippers, just grab the scrub tip of the toothbrush.

Step 3: Use a drill to brush and create a foam of detergent solution.

Step 4: Just turn on the right speed, your drill is ready for floor cleaning.

Automatic pencil sharpening with a portable drill

Step 1: Clamp the pencil to the tip of the portable drill and tighten it.

Now your pencil will be cut automatically quickly.

Handmade mini fan, hot summer prize

Step 1 : Take advantage of 1 liter plastic bottles to make. Using the plastic knife, cut the bottle into 2: 7 parts, take only the top of the bottle.

Step 2: Use scissors to cut out the remaining parts, make sure the cut edges are smooth and smooth.

Step 3: Continue cutting into small pieces evenly (about 2cm on average).

Step 4: Proceed to bend each piece down to form a multi-wing fan.

Step 5: Heat the drill part and pierce the top of the bottle cap.

Step 6: Use a screw of the same size as the hole that was drilled on the top of the bottle cap, then pull it in.

Step 7: Use a glue gun to bond the newly attached screw to the bottle cap.

Step 8: Clamp the remaining screw firmly into the drill head. So you've finished a mini fan for summer cooling!

Application for sharpening knives

Step 1: Just need a simple screw and 2 matching screws. Proceed with 2 screws in the middle of the screw, then fix the 2 screws by using a glue gun to seal it tightly.

Step 3: Screw the drill head and use the tightening bar to fix it. Turn on the drill switch corresponding to the speed of 1. So we have a very fast, extremely convenient tool! Just put the knife into the machine will automatically grind for you.