3 Simple Ways to Install Additional Audio Devices on Your Computer

This guide explains 3 simple ways to install additional audio devices on your computer with practical context and clear actions. Use the points below to avoid common mistakes and make better decisions.

Computers and laptops use sound cards - sound cards to connect audio devices such as music mixers, recorders, and speakers. You can connect and install those devices via wireless standards. However, some devices work via Bluetooth standard (requires distance of operation near the computer)

Method 1: Connect to Bluetooth

Step 1: Go to Start Menu

Move the mouse and select Start Menu At the bottom left corner of Desktop . Select the Settings Option on the right hand side.

Step 2: Select "Devices"

This is the second option in the menu. Below you will find a selection list "Bluetooth, Printers (printer), Mouse (mouse)".

Step 3: on the Left Hand Side Menu Select "Bluetooth"

Step 4: Wait Until the Device Is Detected

If your device is opened and within range, it appears on the screen. Simply select to activate Bluetooth .

If your computer has trouble detecting the device, turn off Bluetooth On the device and then turn it back on.

Method 2: Install Additional Audio Devices Without Bluetooth

Step 1: Open Your Devices

Open your devices so that these devices displays on the new Menu. You need to use a USB port Directly connected to the computer or an audio cable plugged directly into the headphone jack.

Step 2: Go to Start Menu

Select the Start Menu At the bottom left of your Desktop Screen. This is the Browser Menu that allows you to open any app on your computer.

Step 3: Select Control Panel

Go to Start Menu , then select Control Panel . With Widows 8,Control Panel is Located above the right corner of the screen. For Windows 10 , Control Panel Is a green square on the Desktop Screen.

If unfortunately you turn off the Control Panel Window on the computer screen, you can select the SettingsMenu On the Start Menu .

Open the Setting Menu , select "Devices ". This is the second option in the Menu . The next step is to select "Connected devices" On the left side of your screen. Finally, scroll down and select 'Devices and printers' . If you find the device following these steps, skip the next steps.

Step 4: Select "Hardware and Sound"

In the Menu Item that you just opened, the "Hardware and Sound" option appears . On the side is the printer icon and the speaker (Speaker).

Step 5: Select "Add a Device"

"Add a device" Is the blue text on the upper left corner of the Menu . When you select here, a new screen appears. This screen displays all the devices found in your computer after it has been scanned.

If you can't find any devices, try turning them off and then on again. Then scan again. In other words, do whatever it takes to get your device "detected".

Step 6: Enter the WPS PIN Code

A window appears asking for a PIN. If you do not enter a PIN, you will not be able to follow the next steps. This PIN is the accompanying information when you purchase the device. Usually PINs usually include letters and numbers to make it difficult for strangers to detect. However, some audio devices do not require this PIN. After you have entered the PIN code, your device will connect to the computer.

If in case your computer has no sound, please refer to this article

Method 3: for Mac Operating System

Step 1: Open the AudioMIDI App Installation

To do this step, move the mouse to the Menu . This is the 5th option above the right corner of the toolbar. When the app is finished, scroll down to 'Utilities' . This is the 10th option. Once the Menu Is done, two list tables appears AudioMIDI Appears on the left hand side.

Step 2: Select (+))

This is the Add Button. On the screen you can see it is located in the lower left corner of Audio Devices . After select, a new Menu Appears. On this Menu , there are 2 options to choose from. You select the first option, 'Create Aggregate Device' .

General devices including virtual audio interface work with your system. These devices help you connect the input and output elements of one or several audio tools connected to your MacBook.

Step 3: Select Your Device

The new synthetic device appears on the left side of the screen when you select to select this option. If you want to change the name, you can simply double-select it, it will allow you to edit the name.

Step 4: Activate the 'Use' Feature (Use)

For newly selected devices and set the correct name, after being activated, check the Use Feature. This option is located in the left corner of your window.

Check multiple boxes if you want to activate multiple synthetic devices. The order of the devices you just checked is the order of input and output devices in your Menu App.

Step 5: Connect Clock

Set the clock for your synthetic devices to save the time the programs work. At the top of the screen you will see an 'Clock Source' option . Select that option if you want to set an overall clock for the device. If you want to know how each device works, you can set each clock for your own devices.

Step 6: Use the Device

After you have completed the steps, go back to the Audio MIDI Folder and press the right mouse button (or Ctrl + select) On the device you want to use. A new Menu will be turned on and you can choose to use this device for input or output.