How to Find Forgotten WiFi Password
Use the Wi-Fi router's default password
Determine whether you use the Wi-Fi router's default password. If you used the Wi-Fi router's existing password during the first installation, you can find the password by checking the device or related documents.
If you changed your Wi-Fi router's password at some point while using your device, you'll need to use a different method.
Check your Wi-Fi router to find the password. Most manufacturers print the Wi-Fi router password on a sticker on the back or bottom of the device.
The password is usually near the "SSID" heading.
In most cases, the password will be a long series of numbers and upper and lower case letters.
Find the password in the manual or box that came with the Wi-Fi router. In case you still have the Wi-Fi router's box and manual, you can find the login information on a sticker inside the box, in the manual (or on the back of it), or on the A separate card comes with the device. This step is only necessary when you cannot find the default password on the Wi-Fi router.
However, you cannot find the Wi-Fi transmitter's documentation online because the password is set specifically for each product.
Try using the bypass password option to connect. Most Wi-Fi routers allow you to connect by pressing the "WPS" button on the back of the device and then selecting the network on your computer, mobile device, receiver or entertainment device. As long as you select the network within about 30 seconds, you will be allowed to connect your computer (or other device) to the network without a password.
Not all Wi-Fi transmitters have this mode, you need to check the device's paper (or online) documentation to see if it has WPS mode (short for 'Wi-Fi Protected Setup' - Security Settings). Wi-Fi password) or not.
This step will not help you find out the Wi-Fi password, but allows you to connect to the Internet on a previously connected device, helping you find the password using one of the following methods.
Find passwords on Windows machines
Click the Wi-Fi icon on the far right side of the taskbar just below the screen. This will bring up the Wi-Fi menu.
This method only works when you are connecting to a Wi-Fi network whose password you have forgotten.
If you see a computer screen icon next to a cable, you're connected to your Wi-Fi router via Ethernet. You cannot use an Ethernet connection to find the Wi-Fi password.
Click the Network & Internet settings link . It's at the bottom of the Wi-Fi menu.
Click the Wi-Fi tab on the left side of the Settings window.
Click Change adapter options . This link is in the top right corner of the Wi-Fi page, just below the "Related settings" heading. After you click, the screen will display the Control Panel page.
Click on your current Wi-Fi network. You'll see a desktop icon next to the green bars on this page; This is your current network.
Click View status of this connection . It's an option below the address bar at the top of the Network Connections window.
Click Wireless Properties . It's in the middle of the window.
Click the Security tab . It's at the top of the window. This will open a page with a "Network security key" field near the middle of the page; This is where your password is saved.
Check the "Show characters" box below the "Network security key" field. The black dots in the "Network security key" field have now turned into your Wi-Fi password.
Find passwords on Mac
Open Finder. Click the Finder app with the blue face icon in your Mac's Dock.
On your Mac, you don't need to be connected to a Wi-Fi network to find your Wi-Fi password.
Click Go in the row of options in the upper-left corner of your Mac screen.
Click Utilities in the Go menu that appears.
Double-click the Keychain Access app with the key icon in the Utilities folder.
Find and double-click the network name. This is the name you see when your Mac connects to a Wi-Fi network.
You can filter the Keychain list alphabetically by clicking the Name group near the top of the Keychain window.
Check the "Show password" box near the bottom of the network window.
Enter the administrator's password when prompted. This is the password you use to log into your Mac. Just enter the correct administrator password and the Wi-Fi network password will appear in the password field.
Use your Wi-Fi router's setup page
Connect the computer to the Wi-Fi router via Ethernet . If you don't know your Wi-Fi password and your computer isn't connected to the Internet, Ethernet is the only way you can connect.
On your Mac, you'll need to purchase an Ethernet to USB-C (or Thunderbolt 3) adapter before you can connect an Ethernet cable.
If the Ethernet option doesn't work, you must reset the Wi-Fi router to restore default settings.
Find the IP address of your Wi-Fi router. To access the Wi-Fi router's settings page, you must know the device's IP address:
Windows - Open Start , click the Settings gear icon , select Network & Internet , then View your network properties and look at the address next to " Default gateway" (Default gateway).
Mac - Open the Apple menu , click System Preferences , select Network , select Advanced , select the TCP/IP tab , and find the number to the right of "Router:" -Fi):.
Common addresses for Wi-Fi transmitters are usually 192.168.0.1, 192.168.1.1, 192.168.2.1and 10.0.0.1Apple Wi-Fi transmitters.
With some Wi-Fi transmitters, the IP address is often found on a sticker on the side of the device.
Go to the Wi-Fi router's settings page. Open your favorite web browser and enter your device's IP address in the address bar.
You can use any web browser to perform this step.
Entering the Wi-Fi router's settings page. After entering the correct address, you may be asked to enter your username and password; If so, use your device's credentials. This information is different from the information you use to connect to a Wi-Fi network.
The default login name is usually adminand the default password is admin, password, or left blank. Most users will change this information after setting up the Wi-Fi router; however, if you can't remember your username and password, you'll need to reset your Wi-Fi router.
If you don't change the default login information, you'll find it in the documentation that came with your device or on the device.
Go to the "Wireless" section. Once you're logged into your Wi-Fi router's settings page, look for the "Wireless" or "Wi-Fi" section. This step is usually done by clicking the tab at the top of the page or looking in the menu.
The interface of each Wi-Fi router's settings page may be different, so you may want to browse through a few different menus first.
The router's password may also be displayed at the top of the router's settings page.
Find password. On the "Wireless" page, you'll see your wireless network name (SSID) and the type of security or encryption (such as WEP, WPA, WPA2, or WPA/WPA2). Near the security options, you'll see a "Passphrase" or "Password" field. This is your wireless network password field.
Reset the Wi-Fi router
Know when to use this method. If you cannot retrieve your Wi-Fi router's password using the methods described in this article, your Wi-Fi password cannot be recovered and you need to reset your Wi-Fi router.
Resetting the Wi-Fi transmitter does not help you retrieve the current password, but the Wi-Fi transmitter will reset to the default password printed on the bottom or back of the device.
Resetting the Wi-Fi router will also disconnect the devices from the wireless network. For this reason, you should only reset your Wi-Fi router when you have exhausted all options.
Find your Wi-Fi router's "Reset" button. This button is usually on the back of the device. You will probably need a paper clip or needle to push the "Reset" button.
Press and hold the "Reset" button for at least 30 seconds to ensure the Wi-Fi router is completely reset.
The light on the Wi-Fi router will flash or turn off momentarily when the device is reset.
Find your Wi-Fi router's default credentials. This information is usually found on the bottom of the device and includes:
Network name or SSID — The default name of the network you'll see in the Wi-Fi menu.
Password or Key — The network's default password.
Network connections. When entering the password, you will use the default password printed below the Wi-Fi transmitter.
You can change the password before connecting to the Internet.
You should read it
- How to view saved Wifi passwords on Windows 7/8/10
- How to find Wi-Fi passwords of relatives
- 2 steps to change Linksys wifi password
- Instructions on how to view Wi-Fi passwords on Windows 10
- How to find and change Wifi passwords on Windows 10
- Steps to reset forgotten password on Windows 10
- Go to Google to find WiFi password
- How to change FPT WiFi password
- How to change Wifi password, change wifi pass VNPT, FPT, Tenda, TP-Link, Viettel on computer, phone
- How to change VNPT WiFi password
- Instructions for changing Viettel WiFi modem password
- 120 passwords for free WiFi at airports around the world
Maybe you are interested
4 Wi-Fi Router Features for the Best Performance
The entire iPhone 16 lineup adds support for faster Wi-Fi 7
Intel releases new Wi-Fi driver update package supporting Wi-Fi 7 for Windows 11 24H2
4 reasons why Hi-Fi audio is not necessary
Users may have to upgrade to Windows 11 24H2 to use Wi-Fi 7
Here's how iOS 18 makes sharing Wi-Fi passwords between iPhone and Android easier