HomeSystemFix computer error9 Simplest Ways to Fix Computer Not Receiving Mouse Error

9 Simplest Ways to Fix Computer Not Receiving Mouse Error

The computer does not recognize the mouse is a fairly common error. It makes us unable to manipulate, if not using a laptop mouse, it is very inconvenient, affecting work and entertainment. So why does the computer not recognize the mouse? Is there a way to fix the laptop not recognizing any mouse fast? These issues will be answered by TipsMake in detail through the article below. Follow up now!

I. Why does the computer not recognize the mouse?

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 1

There are two types of computer mice today: wired and wireless. Depending on the type, if the machine does not recognize the mouse, there will be different causes.

1. The computer does not recognize the wireless mouse

  1. No Bluetooth driver installed: Wireless mouse works on Bluetooth connection. Therefore, if you have not installed the driver for the computer, the computer will not recognize the mouse.
  2. Damaged Bluetooth modem: A Bluetooth modem with a small size of about 2 x 1cm is used to transmit signals between the mouse and the computer. If this modem is damaged, the computer will not receive the mouse.
  3. Conflict between the computer and other software.
  4. The mouse driver is faulty, causing the computer not to recognize the mouse.

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 2

The computer does not recognize the wireless mouse because the mouse driver is not installed, the mouse driver is faulty, the Bluetooth modem is damaged .

2. For wired mouse

  1. Damaged USB port: The USB port is broken inside, so when the mouse is plugged in, it does not receive a signal.
  2. The USB port has a lot of dust, so when plugging in the mouse, the USB pin is not in contact, and the mouse is not recognized.
  3. Mouse has dead components: Some components inside the mouse are damaged, causing when the mouse is plugged in, the mouse cannot be controlled.
  4. The mouse has a broken wire: The mouse has a broken wire, so when we plug it into the computer, the mouse is not correct when it is received or not, the mouse pointer on the screen is incorrect.

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 3

For wired mice, the cause may be broken mice, damaged USB ports, dead mouse components.

II. How to fix the error that the computer does not recognize the mouse effectively

1. Install the Bluetooth driver for the computer

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 4

If your computer does not have Bluetooth installed, it will not be able to receive the wireless mouse. Please download the driver version suitable for your computer and install it, then plug in the Bluetooth modem. Check if the computer has received the mouse.

2. Restart the computer

The computer has a conflict with some software, so the mouse driver does not run. In this case, please Restart the computer to see if the mouse can run or not.

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 5

3. Uninstall the Mouse Driver 

When restarting the computer, you enter Safe Mode but the computer does not recognize the mouse, it means that your mouse driver has been corrupted. What to do is to uninstall that mouse driver and download the new mouse driver and reinstall it. And finally check if the machine has received the mouse.

4. Replace the new wireless mouse

When you have tried all of the above methods and the computer still does not recognize the wireless mouse, then your mouse is broken. Just get a new wireless mouse.

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 6

5. Plug the mouse into another USB port

If the USB port you are plugging in is damaged, try plugging it into another port to see if it accepts. If you change to another port and still don't receive it, try plugging the mouse into another computer to see if it's the mouse. If it's not the mouse, it's your USB ports that are the problem. Just take it to a repair shop.

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 7

6. Clean the USB port

Dirt USB port interrupts contact. So, clean the USB port regularly with a laptop cleaning brush.

7. Disable/Enable the mouse driver

In many cases, the computer does not recognize the mouse because the mouse driver has been turned off. Please restart by:

  1. Right-click My Computer and select Manage. 
  2. Click Device Manager and select HD Complaint mouse then right-click Disable to turn off the computer mouse.
  3. Using a laptop mouse, right-click on HD Complaint mouse and select Enable to reopen the mouse.

8. Scan for viruses on your computer

Viruses are one of the causes of software and operating systems on computers being corrupted or damaged. So, if the computer does not recognize the mouse, please try to scan the computer for viruses.

9 Simplest Ways to Fix Computer Not Receiving Mouse Error Picture 8

9. Replace the mouse

If you have tried all of the above and your computer still does not recognize the mouse, please replace a new computer mouse. Computer mice on the market today have a variety of models and brands, with low prices.

Hopefully, the information about the cause and how to fix the computer error that does not recognize the mouse above will be useful to you. TipsMake also shares a lot of information about computer errors and many good tips. Please visit often for updates!

4 ★ | 1 Vote

You should read it

May be interested

Fix computer error