3. Reinstall the device driver. Uninstalling and then reinstalling the device drivers is a viable solution for Code 43 error.
Note : If the USB device causes a Code 43 error, uninstall all devices in the Universal Serial Bus controllers section of the Devuce Manager to reinstall the driver. It includes Mass Storage Device, USB Host Controller and USB Root Hub. Reinstalling the driver properly, is not as simple as updating the driver. Reinstalling the driver is completely the process of uninstalling the driver and then let Windows install it from where it came from.
4. Update the device driver. In some cases, updating the latest driver version to the device may fix Code 43. If the updated driver update is fixed 43, it may be that the Windows drivers reinstalled in Step 3 are broken or not. Correct driver.
5. Install the latest Windows service pack. Microsoft service packs or Windows patches may contain a Code 43 fix.
6. Update the BIOS. In some cases, the old BIOS may cause a device problem that leads to Code 43 error.
7. Replace the data cable that connects the device to the computer, if available. This Code 43 fix is useful when an error occurs with external devices such as USB or FireWire devices.
8. Refer to the hardware device user manual and follow the troubleshooting instructions. This measure may seem generic but the Code 43 error is hardware related, so viewing this information may be useful.
9. Buy a USB hub if a USB device causes Code 43 error. Some USB devices need more power than the USB ports built into the computer. Plugging these devices into a USB hub can fix the Code 43 error.
10. Replace hardware. Hardware devices can cause Code 43 errors, in which case the user should replace the hardware. Another possible Code 43 error is that the device is not compatible with the Windows version, checking Windows HCL to make sure there is no device that is not compatible with the software.
Note:
See more:
Good luck!