How to configure FPT optical fiber Gpon modem

The first step after purchasing a new modem to be able to use the network, Internet connection is to configure the WiFi modem. Or if you have already reset the previous WiFi modem, all settings will return to the default state, and users will need to reconfigure the modem. Modifying the modem is also relatively simple. The following article will guide you how to configure FPT optical fiber Gpon modem to access the network.

1. How to change WiFi pass: FPT, TP-Link, Tenda, VNPT, .
2. Instructions for installing Wifi Router Tenda W311R
3. Instructions for configuring Bullet M2HP Wifi router

Instructions for configuring FPT Gpon fiber optic modem

Step 1:

We will connect the Gpon modem to the computer over the network. We can plug in ports if there are 4 LAN ports.

How to configure FPT optical fiber Gpon modem Picture 1

Step 2:

On the computer browser, access the address 192.168.1.1, then enter the following information.

1. User: admin.
2. Password: admin.

How to configure FPT optical fiber Gpon modem Picture 2

Step 3:

The configuration page appears. We switch to the WAN tab and fill in the information as below.

1. WAN IP Mode: PPPoE.
2. Username: fpt (in the form hnfdl-123456-789).
3. Password: It looks like fd12345.

The username and password section will be provided in the contract. Then click the Save button to save.

How to configure FPT optical fiber Gpon modem Picture 3

So you can configure FPT Gpon fiber optic modem to access the Internet. When you buy a new modem or reset, you need to reconfigure the modem to use it, access the network.

See more:

1. Cisco Router Configuration Guide 1800 series (Cisco 1801, 1802, 1803, 1811, 1812)
2. Configure your laptop to be a Wi-Fi hotspot
3. Fixing the error 'WiFi doesn't have a Windows 10 configuration IP validation'

I wish you all success!