HomeSystemLAN - WAN

How to convert WAN port to LAN on router

You can configure the router's WAN port to use it as a LAN port. This is useful when you are using the router in Repeater mode and do not require a WAN port. As a result, you will have one more LAN port.

Especially for mini router devices like the GL-AR300M-Lite, there's only one Ethernet port that acts as the WAN port by default, so you have to connect to it via WiFi. However, once connected to these devices, you can change the WAN port to LAN to connect to it via an Ethernet cable.

What is a LAN port? What is a WAN port?

In homes and small businesses, the WAN port is an RJ-45 Ethernet port on the router, connected to a cable or DSL modem. On small routers, the WAN port may be simply labeled as "Internet". In larger businesses, the WAN port can connect to T3 lines or other WAN services.

How to convert WAN port to LAN on router Picture 1

LAN port is an Ethernet RJ-45 socket on a computer or network device such as a switch or router. All clients, servers and network devices on the local network are connected to each other at the LAN port.

How to convert WAN port to LAN on router

1. Leave the WAN port of the router in a disconnected state.

2. Connect the device to the router and access the Admin Panel on the web.

How to convert WAN port to LAN on router Picture 2

3. Go to the Internet section , then click Use as LAN in the Cable section .

How to convert WAN port to LAN on router Picture 3 Go to the Internet section, then click Use as LAN in the Cable section

4. Click Yes to confirm.

How to convert WAN port to LAN on router Picture 4

You can also revert the installation by repeating the steps in the above procedure. This time, the Use as WAN option will be displayed in step 3.

How to convert WAN port to LAN on router Picture 5 You can revert the settings by clicking the Use as WAN option
4 ★ | 31 Vote
LANWANrouterWAN port

You should read it

May be interested

  • How to configure TP-Link router to Access PointHow to configure TP-Link router to Access Point
    this article will explain how to use the tp-link n router as an access point. the main router will be connected to the tp-link n router via the lan port. wan port is not used for this configuration.
  • Difference between port speed and modem speedDifference between port speed and modem speed
    the router's modem speed is the speed at which it communicates with the modem, while the port rate is the speed at which the router communicates with clients on the local network.
  • Access the home router with admin rightsAccess the home router with admin rights
    although you do not need to connect to your router every day, but you need to solve problems across the network or make changes to your network, such as setting up port forwarding rules, configuring firmware updates, etc. ..
  • What is port 0 used for?What is port 0 used for?
    unlike most port numbers, port 0 is a dedicated port in a tcp / ip network, meaning it is not used in tcp or udp messages. the network ports in tcp and udp range from 0 to 65535.
  • How to Configure TP Link RouterHow to Configure TP Link Router
    a router (or router) is a device that connects multiple devices (such as computers and smartphones) to a network. with a newly purchased tp-link router, you can configure the device through quick setup using the user interface on your pc's web browser. if you don't have enough information, try setting up and using the wi-fi network through the basic steps. additionally, you can use the web-based interface to set up parental controls on the router, as well as assign port forwarding to specific devices. tipsmake today will show you how to configure tp-link router.
  • How to find the default gateway IP addressHow to find the default gateway IP address
    it is important to know the default gateway's ip address (usually the router) on a home or business network, if you want to successfully fix network problems or access management on the router's web platform.
  • Difference between WAN port and LAN portDifference between WAN port and LAN port
    if you look at your wireless router, you may see the abbreviations lan and wan, usually located next to some ports on the device. lan stands for local area network and wan stands for wide area network. so what is the difference between these two types of ports? let's find out with tipsmake.com through the following article!
  • What is AAA PC Port? Why do they have so many problems?What is AAA PC Port? Why do they have so many problems?
    big companies often make aaa games on consoles. however, when they port these games to pc (called porting process), they often run into a ton of problems.
  • How to change LPT port in CMOSHow to change LPT port in CMOS
    on older computers that use the lpt port to connect the software to the printer connected to the parallel port, follow these steps to configure the port in the system bios.
  • How to connect printer 2.0 USB port to USB 3.0 port on Windows 10How to connect printer 2.0 USB port to USB 3.0 port on Windows 10
    the following article will guide you how to connect the usb 2.0 port of the printer to the usb 3.0 port on your computer. if you are having a similar problem, try it now!

LAN - WAN