HomeSystemConfigure Router Switch

Set up the Linksys router with a static IP address

Prepare

Before you start setting up static IP on your router, make sure you do the following:

1. Get the following information from the ISP:

  1. Internet IP Address
  2. Subnet Mask
  3. Default Gateway
  4. Domain Name Server (DNS)

2. Make sure there is an active Internet connection when you directly connect a computer to the modem using an Ethernet cable. Check if you can go online using a static IP address on your computer. If not, contact your ISP.

3. If you have just switched ISP and are currently using a static IP connection, you will need to reset the router first. To do this, press and hold the Reset button for 10 seconds with a pen or paperclip, then unplug the router from the electrical outlet for 30 seconds, plug it in again and wait for the power LED to light up completely.

Set up the Linksys router with a static IP address

Connect the devices together

Set up the Linksys router with a static IP address Picture 1

After verifying the Internet connection, connect the modem to the Internet port on the router and the computer to the Ethernet port.

NOTE: The image may differ depending on the router model, as well as the type of computer and modem you are using.

Check the router's LED

After connecting the devices to the router, verify that they are working properly by checking the LEDs on the router.

Set up the computer to get the IP address automatically

The computer must be set up to get its own IP address in order for it to communicate with the router. Reference: How to assign a static IP address in Windows 7, 8, 10, XP or Vista for more details.

Set up a static IP address on a Linksys router

Step 1:

Visit your router's classic web-based setup page. Open any web browser (Internet Explorer, Mozilla Firefox or Safari) and type 192.168.1.1 in the address bar and press Enter.

Step 2:

You will be asked for login details. Leave the User name field blank and enter admin in the Password field, then click OK.

Set up the Linksys router with a static IP address Picture 2

Step 3:

On the Setup page, select Static IP for Internet Connection Type, then enter Internet IP Address, Subnet Mask, Default Gateway and DNS provided by the ISP.

Set up the Linksys router with a static IP address Picture 3

Step 4:

Click on Save Settings.

If you are using a Linksys WiFi router, you can install Linksys Connect manually after setting up the router using a static IP.

Good luck.

4.3 ★ | 9 Vote
Linksys routerstatic IP addressset static IP address

You should read it

May be interested

  • Broadband router - Save fast and safelyBroadband router - Save fast and safely
    d-link and planet's broadband router brings good news to mobile users when reaching high wi-fi connection speeds while the linksys router gives businesses the ability to set up to 50 concurrent vpn channels.
  • Linksys E1700 review: Basic router with a simple designLinksys E1700 review: Basic router with a simple design
    the linksys e1700 n300 is a basic router with a simple design. the shape of the router is a bit odd. it's a large, flat rectangle, two external detachable antennas that protrude from the back.
  • Review the Linksys EA7500 AC1900 MU-MIMO routerReview the Linksys EA7500 AC1900 MU-MIMO router
    basic parameters such as the speed of the router or how range is very important. and linksys's new ea7500 mu-mimo router is a product to consider.
  • How to block the website when using the Linksys WRT54GS routerHow to block the website when using the Linksys WRT54GS router
    previous article, tipsmake.com showed you how to block website with tp link router, and this time, we will continue to learn how to block / block website access in linksys router. regarding the basic steps, it can be said that blocking website access on router lines is quite similar, only in the option of each device is arranged differently.
  • How to switch Linksys router to Bridge modeHow to switch Linksys router to Bridge mode
    setting the linksys router to bridge mode will disable all router capabilities and turn it into an access point. the router will cease to function as a dhcp server and the built-in firewall and nat features will no longer be valid.
  • How to assign a static IP address in Windows 11, 10, 8, 7, XP or VistaHow to assign a static IP address in Windows 11, 10, 8, 7, XP or Vista
    sometimes, it's better to assign an ip address to a computer so that the router automatically assigns the ip address. let's read this article to know how to assign static ip addresses in windows.
  • 192.168.1.2: Common router IP address192.168.1.2: Common router IP address
    192.168.1.2 is a private, default ip address for some types of home broadband routing. it is also often assigned to individual devices on a home network when a router has an ip address of 192.168.1.1.
  • Why use dynamic DNS instead of static IP address?Why use dynamic DNS instead of static IP address?
    most internet users don't think much about their ip addresses, but for anyone who hosts a server or accesses a device remotely, choosing between dynamic dns and static ip is important for both cost and convenience.
  • How to reset the Linksys router to its factory default settingsHow to reset the Linksys router to its factory default settings
    when you reset the router, the settings will be reset to factory defaults. all custom router settings (wifi name (ssid), wireless security, etc.) will be deleted.
  • List the default password of the Linksys routerList the default password of the Linksys router
    most linksys brand routers have the default admin password and the default ip address is 192.168.1.1 but some models are not. specific details will be available in the table below.

Configure Router Switch