List NETGEAR router default password
Netgear routers usually have a default password of password and the default IP address is 192.168.1.1 or 192.168.0.1. However, as the table below shows, there are many exceptions.
The extra help is below the table, if you do not see your NETGEAR device listed, the default listed data does not work, you need help changing your password once or have other questions.
NETGEAR default password list
- NETGEAR default password (Valid until November 2018)
- Please change your default NETGEAR password!
- What to do if NETGEAR's default password doesn't work?
- What to do if NETGEAR's default IP address doesn't work?
NETGEAR default password (Valid until November 2018)
1) These NetGEAR switches have the default IP address assigned via DHCP, which means that the IP address will be different depending on the network on which the switches are installed, the information you can receive By checking the dynamic IP address that the DHCP server (usually the router on the network) has assigned to it. The IP address listed next to some of the default IP addresses assigned to DHCP in the above table is the default IP address, only if there is no DHCP device on the network or there is an IP assignment problem.
2) NETGEAR network adapter FSM726 has three hardware versions. Version 1 & 2 all have the default password of 1234, while version 3 does not require the default password (ie leave this section blank) and has a default IP of 169.254.100.100, without the machine DHCP server automatically assigns.
3) NETGEAR RP614 Router has many hardware versions. Version 1, 2 and 3 all have the default IP address of 192.168.0.1, while version 4 and all later versions have the default IP of 192.168.1.1.
4) Version 1, 2, 3, 4 and 5 of NETGEAR WGR614 router has the default IP address of 192.168.0.1. Version 6 and above has the default IP address of 192.168.1.1.
5) WGT624 routers manufactured with hardware version 1 or 2 have the default IP address of 192.168.0.1, and version 3 and above have the default IP of 192.168.1.1.
Please change your default NETGEAR password!
It's good when you log in to your NETGEAR router and switch to the default data. Because as you can see, all default information is public!
That means anyone can access your NETGEAR device anytime, make any changes they want, including installing some smart malware and more.
So the first thing on your to-do list is now to change the default password, making it a difficult thing to guess without anyone else knowing you.
What to do if NETGEAR's default password doesn't work?
The only action when the NETGEAR default password on your device is no longer the root password, is to reset your device to its original state.
On most NETGEAR routers, the original installation process is quite simple. Use a pen or paper clip to press and hold the red Restore Factory Settings button, found at the bottom of the router.
Do this when the router is powered on and hold it for 10 seconds or until the power light starts flashing.
When you release this button, your NETGEAR device will automatically restart. After the power light turns white or green, your device will be reset, returning to the default password listed above for your model.
If the process does not work, you should consult the PDF manual for your specific NETGEAR router, available from the NETGEAR Support page.
What to do if NETGEAR's default IP address doesn't work?
Restoring the original settings also resets the default IP address (you will find information for your model in the table above).
Another option is to try http://www.routerlogin.com or http://www.routerlogin.net, two addresses that only work on your NETGEAR internal network and devices. Router Orbi NETGEAR uses http://orbilogin.com or http://orbilogin.net.
If you still can't find a solution to the problem, try finding the default gateway IP address, showing you how to determine the default port for your router.
Do you have more questions about NETGEAR's default password or the default network data in general? Leave comments in the comment section below!
Good luck!
See more:
- Linksys default password list
- Enable remote management on NETGEAR router
- Reset and change the password of the Verizon FIOS Router device
You should read it
- NETGEAR Orbi review: One of the most powerful mesh router
- Frequently asked questions about the default password
- How to set up Port Forwarding on Netgear router
- List the default password of Cisco routers and switches
- Netgear router not working? Here's how to fix it!
- Enable remote management on NETGEAR router
- How to set up and configure DDNS on Netgear router
- Review NETGEAR Nighthawk R7000 AC1900: Leading dual band router
May be interested
- List the default password of Cisco routers and switchesthe default cisco password will give you access to the router's administration interface and make changes to your security settings or change your wifi password. most cisco routers and switches have a default password of admin or cisco and the default ip address is 192.168.1.1 or 192.168.1.254.
- List the default password of D-Link routerd-link routers almost never require the default password and often use the default ip address of 192.168.0.1 but there are exceptions, as you can see in the table below.
- Does your router use IP address 10.0.0.1?the 10.0.0.1 ip address is a private ip address that can be used on a client device or assigned to a part of the network hardware as its default ip address.
- How to fix slow or unstable Wi-Fi connectionis your wireless connection okay? your wi-fi may be slow. this problem is quite common in high density residential or residential areas. fortunately, this problem is not difficult to overcome.
- Use low bandwidth Internet with MicroEmulatorfor those who work on the internet, it is difficult to travel or work to rural areas. this article will show you how to use microemulator emulator software to use the internet with low bandwidth.
- Learn 192.168.0.100 IP address for local network192.168.0.100 is a private ip address, meaning it is used exclusively on private networks where it will be the ip address of the router or one of the devices on the network.