How to find the default IP address of a Belkin router

The family broadband router is assigned two IP addresses. An address to connect to external networks such as the Internet and an address to communicate with devices located within the network.

Internet service providers provide Public IP addresses for external connections. The router manufacturer sets the default Private IP address used for the local network and the home network administrator controls it. The default IP address of all Belkin routers is 192.168.2.1.

Find the default IP address of Belkin router

  1. Set the default IP address of Belkin router
  2. Default username and password
  3. Things to know when resetting the router
  4. Change the default IP address of the router

Set the default IP address of Belkin router

Each router contains a default Private IP address when it is manufactured. Specific values ​​depend on brand and router model.

How to find the default IP address of a Belkin router Picture 1

The administrator must know the address to connect to the router's control panel through the browser, to perform things like changing the wireless password, setting up port forwarding, enabling or disabling Dynamic Host Configuration Protocol. (DHCP), or place a custom Domain Name System (DNS) server.

Any device connected to a Belkin router using the default IP address can access the router control panel on the web browser. Enter this URL in the address field in the browser:

 http://192.168.2.1/ 

This address is sometimes referred to as the default gateway address because client devices consider routers such as ports to the Internet and computer operating systems sometimes use this term on their network configuration menus.

Default username and password

You are prompted to enter the admin username and password before you can access the router control panel. You should change this information the first time you set up the router. If you have never done this and just need the username and the default password for the Belkin router, try the following:

  1. Default username: admin, Admin or leave blank.
  2. Default password: admin, password or blank.

If you change the default login information and lose new login information, reset the router and then enter the default username and password. On Belkin routers, the reset button is usually located on the back side of the Internet port. Press and hold this reset button for 30 to 60 seconds.

How to find the default IP address of a Belkin router Picture 2

Things to know when resetting the router

Resetting a Belkin router replaces all network settings, including its local IP address, by the manufacturer's default values. Even if the administrator has changed the default address before, resetting the router will change everything back to default.

Resetting the router is only necessary in rare situations, when the device is updated with an incorrect setting or invalid data, such as a firmware upgrade is faulty, causing it to stop responding to love. admin connection

Unplugging or using the router's on / off switch does not cause the router to revert its IP address settings to default. The process of resetting the actual software to the factory default settings must still take place.

How to find the default IP address of a Belkin router Picture 3

Change the default IP address of the router

Every time the home router is powered on, it will use the same private network address unless the admin changes it. Changing the default IP address of the router is necessary to prevent IP address conflicts with other modems or routers already installed on the network.

Some homeowners like to use easy-to-remember addresses. There is no advantage in network performance or security from using any Private IP address compared to other IP addresses.

Change the router's default IP address without affecting the other administrative settings of the router, such as the DNS address value, network mask (subnet mask) or router's password. It also doesn't have any effect on Internet connection.

Some Internet service providers monitor and allow home networks based on the modem or media (Control Access Control (MAC) access of the modem, not their local IP address.

See more:

  1. List the default password of Cisco routers and switches
  2. List the default password of D-Link router
  3. List the default password of the Linksys router
  4. List NETGEAR router default password
3.9 ★ | 7 Vote

May be interested

  • 11 best long-range Wifi routers 2018Photo of 11 best long-range Wifi routers 2018
    consumer wireless routers have many types depending on the wifi broadcast range. routers have a stronger wifi signal that allows devices to connect to higher speeds from larger and easier distances. so which router is the best?
  • The best 10 Wi-Fi Extender todayPhoto of The best 10 Wi-Fi Extender today
    a wi-fi extender device may be the cure for the problem you're having. today's article will introduce you to the best 10 wi-fi extenders you can buy at the moment.
  • How to choose the appropriate MicroSD card for Nintendo SwitchPhoto of How to choose the appropriate MicroSD card for Nintendo Switch
    the switch has a microsd card reader that allows you to expand the onboard memory. this is what you should consider when choosing microsd card for your switch, along with a few suggestions.
  • 7 routers with the best parental control featurePhoto of 7 routers with the best parental control feature
    fortunately, there is a collection of routers with powerful parental controls that help you monitor your child's network life and temporary network lock when needed.
  • Instructions on how to install DD-WRTPhoto of Instructions on how to install DD-WRT
    are you frustrated by software limitations on your router? go ahead and replace that software with dd-wrt software provided by linux.
  • Top best 802.11ac Wi-Fi wireless routerPhoto of Top best 802.11ac Wi-Fi wireless router
    the latest wi-fi routers using 802.11ac technology, bring some improvements over the previous protocols, including wider channel bandwidth, more mimo streams and beamforming technology.