Judge the error on Sony TV via flashing indicator

In order to diagnose the operation status of the TV, we can use the power signal on the device as with Sony television. The power lights on the TV through color and flashing will help users know whether the TV is in good use, or encountering some problematic error. In the article below, we will list all the lights on TV attached to the errors that the TV has.

1. Red light source:

If your Sony TV light source turns red and continuously flashes, it means that the TV is faulty. Maybe it's just a software error, a connection error . but it can also be a serious error related to the system.

How to fix:

1. When you encounter this situation, you need to turn off the TV, wait about 2-3 minutes, then turn it on again. If the red light source still occurs, unplug the TV and plug and restart the TV.
2. You need to make sure that the air around the TV is cool, not located in a secret place, hot and there is no escape route. If the TV has slots / ventilation holes, wipe off the dust.
3. If you are using internet TV, Sony smart TV, update the software to the TV.

If you have done all three ways but the TV still says the red light, immediately turn off the TV and call the warranty center.

2. Power light is yellow or orange:

If your Sony TV light source is yellow or orange, it is possible that the TV is in the following two modes:

1. If the yellow light is flashing, the TV is updating the software. Now, wait a few minutes for the television to update, and absolutely don't turn off the TV, unplug the power.
2. The TV is now set to on / off. Therefore, if you do not intend to set a TV timer and see a yellow light, go to the TV's time settings menu, see if it is mistakenly pressed.

Judge the error on Sony TV via flashing indicator Picture 1

To check if the TV is set to on / off timer mode, you can operate as follows:

1. For regular Sony TVs, or basic Sony television internet such as Sony R550C, Sony R500C, Sony W750D .: Press the HOME button on the remote> select System settings > select Settings > select Clock / Timer .
2. For TV internet Sony Sony Entertainment Network interface such as Sony W700C, Sony W700B .: Press the HOME button on remote> select Settings > select System settings > select Sleep mode .
3. For Android Sony TVs such as Sony W800C, Sony X8000C, Sony X8300C, Sony X8500D .: You press HOME button on remote> select Settings > select TV > select sleep mode .

3. Lights are white or green:

White or blue light means the TV is turned on.

1. The lamp is flashing white or blue, meaning the TV is turned on, and will stop flashing when the TV has finished booting. If the TV is turned on, but the light doesn't go on normally and keep flashing, turn off the TV and restart.
2. If you press the button on the remote and see the light blinking, it means the TV is receiving the signal from the remote. This is a perfectly normal expression. However, note that not all Sony TVs have this feature. Some TVs when you press the remote white light will remain still, not flashing.

Judge the error on Sony TV via flashing indicator Picture 2

4. The lamp flashes continuously:

The TV light is broken. You need to contact a service center or call a mechanic for a replacement.

5. Power light does not light:

Probably because you are installing the TV in the light source mode. If you want the TV to turn on, you can go to the TV settings and reset.

To check if the TV is set to power off, you can operate as follows:

1. For regular Sony TVs, or basic Sony television internet such as Sony R550C, Sony R500C, Sony W750D .: You press HOME button on remote> select System settings > select Settings > select LED indicator . If you want the TV to turn on the power light, in this section you only need to select On .
2. For TV internet Sony Sony Entertainment Network interface such as Sony W700C, Sony W700B .: Press the HOME button on the remote> select Settings, select System settings > select General settings> select LED lighting .
3. For Sony Sony TVs such as Sony W800C, Sony X8000C, Sony X8300C, Sony X8500D .: You press HOME button on remote> select Settings > select TV > select LED light to illuminate .

Refer to the following articles:

1. What are the connection ways to watch videos on TV?

1. How to connect a laptop to a TV using an HDMI port

1. How to connect mouse, keyboard with Smart TV

Hope few posts above useful to you!