Click on the Wi-Fi Wave with an Empty Beer Can

This updated guide examines Click on the Wi-Fi Wave with an Empty Beer Can and organizes the essential facts, background, and practical takeaways in clear American English.

Weak and weak wifi waves have many different causes such as fish pots, decorative flash lights and many other household items that affect the quality of Wi-Fi waves

Instead of crazy, struggling with wifi in this case, you can immediately apply our way with just 1 can of beer you can make wifi become smooth and escape " disaster " network lag already.

All the ingredients you need to turn on the wifi, make the wifi run smoothly is just an empty beer can, don't you believe it? Follow these steps with Network Administrator.

Step 1 : As mentioned above, to make the network run out of lag you use an empty beer can.

Step 2 : You can remove the lid completely, then use a knife along the paper to cut off the bottom of the can and the top of the beer can, noting in particular the head of the beer you do not cut off all but leave a few cm.

Step 3 : You cut a straight line from the bottom of the beer can up to the mouth of the can on the opposite side of the rest.

Step 4 : When all is cut, use your hand to bend the cut body so that you can see the same beer as a "pan". At this stage, you are very careful and careful because it is very difficult to get your hands cut because of the sharp edges of the beer.

Step 5 : You just need to put the receiver "pan" is made from beer cans on the antenna of the wifi transmitter, so you can comfortably surf the internet, watch movies without fear of wifi network lag or lag anymore..

Do not hesitate any more, try it right away if your home wifi has these problems.

Wish you success with this way.