Keyboard failure is a common problem for laptop users
In case the keyboard is broken, only buttons that are broken are not usable and all buttons on the keyboard still work normally. To solve this problem, the user first turns the keyboard upside down and uses a hand to shake it so that the debris from the key is broken from the keyboard. Next use a vacuum cleaner to clean the slots, crevices between keys. Removing and cleaning the entire key press is also essential in this case.
Once the laptop is dead, the screen will not be able to display any color at that point or area. Not only that, dead spots can also spread very quickly and make your computer screen extremely bad. Therefore, any consumer who wants to buy a laptop will be advised to check the product before taking it home.
To deal with the dead spot, use a soft dry rag lining on the dead spot area and press it hard with a fingertip. Next, just press and rotate your fingertips like reflexology, or massage. However, be careful because you can scratch or damage the screen if too much force is used.
Users can fix dead spots by massaging the screen
In addition, to solve this problem, users can use a software called JScreenFix . This program has the ability to illuminate a lot of colors with high intensity on the screen. Thereby helping "revive" the faulty points and if lucky, some dead spots can also be . revived.
This is one of the most serious and often occurring incidents with laptop users. Just a little wire out of the computer parts is your device will be in trouble and can completely become scrap.
Water is the number one enemy of laptops and other electronic devices
If the computer is plugged in, cut off the electricity in the room before touching it, and if the device is running on battery power and you don't see any strange symptoms or smell the smell, you should turn off the laptop right away. If there is a problem, the laptop must be turned off immediately by turning off or removing the battery.
After disassembling the power and battery, put this device aside. Continue to disassemble all cards connected to the machine, clean. You should also carefully wipe the slot with cotton, to avoid leaving the cotton while wiping. Finally, leave the device open in a well-ventilated place, taller than two books. Maintain this process 24 hours, absolutely do not use a fan or dryer to speed up the drying speed. When performing a restart of the computer 24 hours later, use the battery before using the power source.