Some car wash codes have threaded gun: Hyundai HRX815, Ergen EN-6708, Kachi 1400W .
Step 4: Install the spray head with the remaining pressure on the machine.
Step 5: Install the device to connect the water source to the machine. In some car wash codes such as: equipped with a garbage filter to connect with water conductors to help filter the dirt, rubbish from the water into the machine, protect the machine from damage, for high durability.
Some car washers are not equipped with water conductors, so when installing, you need to buy more wires!
After installation is complete, you only need to connect the machine to the power source, water source and turn on the switch to use it only!
In some lines the car wash has the function of sucking water from the bucket. These codes are very convenient, so you can easily wash the car, spray it even when not near direct water source. With these machines, you just need to put the wire into the bucket, turn on the switch, squeeze the trigger and wait for the water to spray. In case the suction pressure is too weak, you can bait the water by pouring water into the water cord before use. Note that you should put the bucket of water on the same plane with the machine or higher to create pressure and not too far from the machine.
For washing machines that do not have self-suction function, you need to connect the water cord directly to the water source. Turn on the switch and spray as usual.
In the process of use, you can change the nozzles: tubor, flexible nozzles, scrubbing table, soap spray head . depending on usage needs. With a flexible nozzle, you can adjust the spraying style to spray the soap on the car's surface, avoid scratching the car paint. Pinch spray helps create strong pressure, flying stubborn stains under the car, wheels .
1. Bosch Aquatak-33-11 car washer
2. Ergen EN-6708 car washer
3. V-JET VJ 100 washing machine
>>> Further reference: "Review the top 3 best car wash brands today".
Thanks for watching!