Instructions for installing Wifi Router Tenda W311R

Wireless Router Tenda W311R has Wifi broadcast function for mobile devices or laptops that can access the internet, do you know how to configure them? The following article will show you how to configure them.

Note before configuring the Wireless Router Tenda W311R:

- You need to carefully look at the parameters attached to the router such as the address to access ( usually 192.168.0.1 ), username and password to login ( usually for admin and admin or 12345678 ). If you do not have access to it, you should go back to the initial default mode for easy configuration ( Black, small Reset button at the back of the Router ).

- Should use Internet Explorer (IE) instead of using Firefox or Google Chrome.

- When configuring you should plug the router directly into your PC via RJ45 cable and plug in the yellow LAN on the router

- On the computer, you set dynamic IP, not set static if set static, must coincide with the router's IP address range

Start configuring the Wireless Router Tenda W311R

Step 1: Access the Router according to the parameters attached

Click DHCP , let the Router grant the device IP dynamically when accessing the network, then click Advanced to continue

Step 2 : Here you click the Wireless card

Step 3 : Select as shown below

With SSID is your Wifi network name and Network Mode is the network standard that you play ( here I choose 802.11b and g ), you can change these parameters as you like. Then click Wireless Security to continue

Step 4 : You can choose as shown below

With Security Mode is the security mechanism, enter the password in the Security Key box and then select Ok to finish.