You can use a water hose stopper or a cloth with hot steam to seal the pipe. Seal the pipe within 30 minutes. At this time, the foam will work to corrode the switch.
2. Vacuum the pipe
How to clear the drain hose when clogged with vinegar simple and effective Picture 5
Use a small rubber catheter to fit the size of the sink to create an impact on the clogged material. Seal and press the rubber tip down the drain hose and push the tool up and down.
The catheter is most effective when filling the bath or sink with water.Water will increase the pressure and make the switch point.
3. Use the hook to pull the garbage out of the switch
How to clear the drain hose when clogged with vinegar simple and effective Picture 6
If the duct is blocked by hair, use a metal hook and break into a long metal wire with a small hook at the top. Carefully thread the hook end of the metal wire into the pipe. After that, spin the hook to remove all the trash. When the garbage is caught in the hook, gently unplug it.
Pay attention not to scratch the metal bath or sink.Moreover, you should also be careful when bending or bending by very sharp metal.
4. Use a wire pipe interlock tool
How to clear the drain hose when clogged with vinegar simple and effective Picture 7
The wire pipe interlock tool is shaped like a long piece of metal rope. You need to carefully insert this tool into the drainage pipe. When the string is stuck, turn the rope lightly so that the garbage in the tube gets into the wire, then slowly pull the cord out, the water pipe will be cleared. Then rinse and repeat the process.
Protective gloves should be worn by metal tools that can be very sharp and prepare an old towel, a small bucket for storing garbage in the pipe.This metal bar can be very sharp.
Method 3: Drain the pipe
1. Drain the pipe with hot water
How to clear the drain hose when clogged with vinegar simple and effective Picture 8 Boil at least 6 cups of hot water or a full kettle. Open the lid and slowly pour hot water down the pipe.
Note if your home uses plastic pipes, do not use water that is too hot and avoid boiling water into the pipes.
2. Repeat the process
How to clear the drain hose when clogged with vinegar simple and effective Picture 9 If the water is still draining slowly, repeat the process until the water can completely drain.
If the water is still not drained, there is a possibility that a lot of hair gets in the pipe.Therefore, manual operation may be required to clear the switch.Besides, you should call a plumber, especially if the tube completely stops flowing.
3. Use gravity and pressure to discharge the pipe
How to clear the drain hose when clogged with vinegar simple and effective Picture 10 This is best suited for drainage pipes in the bathtub because you can fill dozens of liters of water into the tub. In addition, flush hot water into the tank then open the drain cover and allow the pressure of the water to block the switch.
Refer to some more articles:
7 cleaning products should never be mixed together