DNS Google: How to Checking Google DNS Settings After Changes

This updated guide examines DNS Google: How to Checking Google DNS Settings After Changes and organizes the essential facts, background, and practical takeaways in clear American English.

Has Google DNS check been working properly?

1. From the browser, enter the hostname URL (such as http://www.google.com/). Try bookmarking and accessing the page from that bookmark.

If you are using Google Public DNS64 on an IPv6-only system, repeat the test with the IPv4-only server URL (such as http://ipv4.google.com/). If all of the above two methods work normally, you are set up correctly. If not, go to step 2.

• How to change DNS Google IPv4 and IPv6 on Windows 10 Fall Creators
• How to change DNS Quad9 to block malicious domain
• How to change DNS to be able to surf faster, don't worry about being blocked

2. From your browser, enter a fixed IP address. You can use the URL http://216.218.228.119/ (this page will navigate to the test-ipv6.com website).

If you are using Google Public DNS64 on an IPv6-only system, use the http:/// URL [64: ff9b:: d8da: e477] /. If this test does not work, you will not be able to access NAT64 port and cannot use Google Public DNS64.

If you are using an IPv6-only system without Google Public DNS64, use the URL http:/// [2001: 470: 1: 18:: 119] /.

If this works correctly, bookmark the page and try accessing the site again from the bookmark. If this test works (but fails in step 1) then there is a problem with your DNS configuration. Check the steps above to make sure everything is configured correctly.

If the above tests still don't work, go to step 3.

3. Go back to the DNS changes you made and try the test again. If the tests still do not work, then your network settings are probably having problems. Try contacting your ISP or network administrator for assistance.

Good luck!

See also: The best and fastest DNS list of Google, VNPT, FPT, Viettel, Singapore