Table of Contents
This article examines Tests on Computer Networks with Answers - Part 5. It presents the main facts, practical implications, and key points in a clearer, easier-to-follow format.
Understanding Tests on Computer Networks with Answers
- Question 1. It is not the task of the data link layer.
- Identify mechanisms to access information on the network.
- Provides basic ways to detect and fix errors.
- Connect networks by finding paths for packets from one network to another.
- Notify the sender of the error message
- Question 2. The architecture of the TCP/IP model consists of layers.
- Application, Transport, internet, Network interface.
- Application, Transport, Network, Physical.
- Application, Transport, Data link, Network interface.
- Application, Transport, internet, Physical.
- Question 3. At the transport layer, the size of the data packets.
- Less than 32KB
- Less than 64KB
- Depending on the network to which the device sends the connection.
- Depends on the network to which the device is connected.
- Question 4. In the OSI model, the layer ARP protocol.
- Application layer
- Shipping floor
- Network layer
- Data link layer
- Question 5. Which Gateway is in the OSI model.
- Physical layer
- Data link layer
- Network layer
- Application layer
- Question 6. What is the layer of TCP/IP model to help reduce the transport and avoid congestion on the network?
- Application layer
- Transport floor
- Network layer
- Network communication layer
- Question 7. Network layer data in TCP/IP model is called?
- Data
- Data segment
- Data frame
- Data package
- Question 8. What are the similarities between OSI and TCP/IP models?
- There are equal number of floors
- Provide packet switching communication method.
- There are transport layers and data link layers.
- The application is in fact the same
- Question 9. The size of the data frame in the TCP/IP model?
- Less than 64KB
- Greater than 64KB
- Depends on the network to which the device sends the connection.
- Depends on the network to which the device is connected.
- Question 10. What protocol is used at the network layer in the TCP/IP model?
- IP, ARP
- TCP, IP
- TCP, ARP
- ARP, UDP
- Question 11. What is the physical address length of an Ethernet network?
- 32 bit
- 48bit
- 64 bit
- Smaller than 64 bits
- Question 12. Is the physical address specified by?
- Application layer
- Network layer
- Data link layer
- Physical layer
- Question 13. Is IPv4 divided into several classes?
- 3 layers
- 4 classes
- 5 class
- 6 classes
- Question 14. The port for each file is 21, Socket is 198.168.17.1.21, so the IP address is?
- 198. 168. 17.21
- 198.168.17.1
- 198.17.1.21
- 168. 17. 1. 21
- Question 15. Which of the following statements is wrong?
- You can assign more than one IP address to a physical address.
- Physical address is not fixed
- ARP protocol used to find physical addresses from IP addresses.
- The RARP protocol is used to find IP addresses from physical addresses.
FAQ
What is the main point of Tests on Computer Networks with Answers - Part 5?
It is not the task of the data link layer. Identify mechanisms to access information on the network.
Why is Tests on Computer Networks with Answers - Part 5 important?
Tests on Computer Networks with Answers - Part 5 matters because it can affect how readers understand, choose, use, or respond to the subject discussed in the article.
What should readers verify about Tests on Computer Networks with Answers - Part 5?
Check the date, product or software version, compatibility, and any current guidance before acting, especially when technology, security, health, or pricing is involved.
Reader Comments 0
Sign in with email or Google to join the discussion.