How to install and use mop

With a busy life like today, cleaning and taking care of the house is quite time consuming for the women. Besides devices that support this work like vacuum cleaners, intelligent vacuum cleaners . the mop is indispensable in every family. The 360-degree mop is preferred by women because of its utility and efficiency. So, how to use and install the mop? Please refer to the article below.

360 degree mop concept

360 degree mop is a new type of mop brush, with a rotating turntable and broom to help users easily put in and clean in the most difficult places like roaring cabinets, under the bed. Stairs or narrow cabinets.

In particular, the part of the handle can be easily adjusted for long periods depending on the needs and the cleaning position is very convenient. You can adjust the tilt of the mop with the middle roller.

The 360 ​​degree mop consists of two main parts: a mop and a bucket to clean the house. Some types also have a two-compartment bin with two washing functions and a squeeze-drying brush that is very simple and does not harm the skin.

How to install and use mop Picture 1

How to use 360 ​​degree mop

Step 1: Install the mop

1. Installing a house mop: You can attach or remove 2 connecting pipes easily. Depending on the purpose of use, you can vary the length or length. There are several types of reels that have a self-correction function.

How to install and use mop Picture 2

1. Attaching a mop brush: Next, attach a cotton broom to the spinning tray at the end of the reed, you can use your foot to press or use the force of the hand to fit together. There are many types of reed plants that use swivel joints, which you turn on when you see the match is okay.

How to install and use mop Picture 3

1. How to remove the mop: to remove the mop head with your hand and insert it in a circle under the mop and then push it out. You can also use your feet to block the broom to remove the mop.

How to install and use mop Picture 4

Step 2: Instructions for washing mop

To wash the mop, pour water into the tank, add the water to clean the floor

Next, dip the mop brush, click up and down to get the brush tip wet and clean.

Step 3: Guide to squeeze the mop

You put the mop into the basket and squeeze it vertically 90 degrees above the water tank.

Using plastic hand to squeeze the plastic on the bottom aluminum tube facing downwards, then lightly and evenly pressing on the stem, the squeezed basket will spin and the mop is dried.

There are other types of cleaning brushes that can be squeezed by using a foot pedal. You just need to put your foot in the pedal and press the word slowly to fast, the centrifugal basket will help clean the brush.

When continuing the cleaning, you must push the plastic lock upwards to help the mop do not rotate while cleaning the house.

How to install and use mop Picture 5

Some notes when using mop

About 2 weeks / time, you should wash the mop head with soap so that the mop head stays clean.

Replace the brush tip every 6 - 9 months.

Brush type using the pedal: You should check the pedal oil for the pedal every 2 months.

Empty the water or remove the drain valve, scrub, brush and barrel after use. Do not soak brooms in a water container.

Above is the installation guide and note when using 360 degree mop. Hope you will use the mop effectively.

Thank you for following the article